Executive Summary The ADA prohibits discrimination on the basis of disability.5 The ADA requires facilities constructed or altered by state and local governments, and public accommodations...
Search Results "Altered Element"
-
2. Executive Summary
-
PUBLIC USE
[DSA-AC] Interior or exterior rooms, spaces, or elements that are made available to the public....
-
11B-1001.1 Scope
Unless otherwise modified or specifically addressed in Division 10, all other ADAAG provisions apply to the design and construction of recreation facilities and elements....
-
Final Regulatory Flexibility Analysis
Advocacy expressed support for the Department's proposal to allow an element-by-element safe harbor for elements that now comply with the 1991 ADA Standards and encouraged the Department...
-
Sec.36.403(h)(1)
(1) The obligation to provide an accessible path of travel may not be evaded by performing a series of small alterations to the area served by a single path of travel if those alterations...
- Landscape Forms Inc. 35: Guide Illuminated Bollards
- Tile Tech Pavers® Oceanic™ Series - Wave-Pave™
-
Regulatory Impact Analysis.
According to the Department's initial Regulatory Impact Analysis ("RIA"), it is estimated that the incremental costs of the proposed requirements for each of the following eight existing elements...
-
§ 37.43(g)
(g) If a public entity performs a series of small alterations to the area served by a single path of travel rather than making the alterations as part of a single undertaking, it shall nonetheless...
-
§382.10(c)
(c) Your application must be in English and include the following elements:...
- Landscape Forms Inc. 35: Guide Illuminated Bollards Video
-
11B-306.2.3 Minimum required depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (432 mm) minimum under the element. Exceptions: 1. ...
-
PUBLIC USE
[DSA-AC] Interior or exterior rooms, spaces, or elements that are made available to the public....
-
F202.2.1 Accessible Route
accessible entrances serving the addition are provided in the existing building or facility, the accessible route shall connect at least one existing entrance to all accessible spaces and elements...
-
R103 Conventions (Section-by-Section Analysis)
Where the required number of accessible facilities or elements is based on ratios or percentages and remainders or fractions result, the next greater whole number is required....
-
F247.4.4 Routes
Routes that connect trails complying with 1017 to camping facilities, picnic facilities, viewing areas, pit toilets, and accessible elements provided within the facilities shall comply with...
-
Knee Clearance: Clearance as Measured from Distal Knee Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., lavatories, drinking fountains)....
-
Knee Clearance: Clearance as Measured from Anterior-Most Abdomen Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., dining tables)....
-
Can handrails overlap door maneuvering clearances?
However, door maneuvering clearances can be offset up to 8” from the face of the door or gate to accommodate wall thickness, casework, shelves, or other elements adjacent to doorways, including...
-
11B-306.2.3 Minimum required depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (432 mm) minimum under the element....
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
These elements are subject to requirements for operable parts in section 309, which specify location within accessible reach ranges and maximum operating forces....
-
1002.5 Amusement Ride Seats Designed for Transfer
The proximity of the clear floor or ground space next to an element and the height of the element one is transferring to are both critical for a safe and independent transfer....
-
Wheelchair Turning Space [4.2.3]
Overlapping Fixed Elements Fixed elements can overlap turning space if required knee and toe clearances are provided....
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
