Communities are best understood by their own residents—a fact that makes community-based emergency planning and response highly effective....
Search Results "Web-Based Service"
-
Introduction
-
Current industry standard practices resulting from this project
The research was conducted by the University of Pittsburgh Human Engineering Research Laboratory and was based on exposure limits of vibration to the human body established in ISO 2631,...
-
Character Spacing: ADA Standard Section 703.2.7
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
Dimensions and Capitalization: ADA Standard Section 703.3.1
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
Dispersion: ADA Standard Section 235.2.1
Section 235.2.1 covers scoping requirements in the current ADA Standards for dispersion of boat slips.
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
Re: Section 307 Protruding Objects
Yes, it is a protruding object hazard based solely on section 307, but so is the (code compliant) lavatory with its (required) 29" high front edge, and the 8" deep (code compliant) shelf...
-
BEA Inc. LZR-Microscan Swinging Door Sensor
The LZR-microscan automatically adapts and adjusts its detection zones based on the door's position, ensuring complete and consistent safety. ...
-
NewVision™ Curb Ramp Inventory System (NVCRIS)
iPad Calibration Board Rental and Cellular Service is optional. iPads are configured to your city's specifications....
-
Hoyer Journey Stand-Up Lift
folding design allows the Journey to stand unaided Adjustable cow-horn mechanism supports a range of patient sizes Adjustable kneepad Bump guard protects against base...
-
M305.3.2 Height
The height of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
A4.2.4 CLEAR FLOOR OR GROUND SPACE FOR WHEELCHAIRS
The space requirements in this standard are based upon maneuvering clearances that will accommodate most larger wheelchairs. Fig....
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances....
-
§ 38.159(a)(2) Exception
If portable or station-based lifts, ramps or bridge plates meeting the applicable requirements of this section are provided at stations or other stops required to be accessible under regulations...
-
11B-228.3.2.1 Public use or common use EVCS
EVCS are not addressed by 2010 ADAS, although a case could be made, based on the general obligation for governments to make their services, programs or activities available to individuals...
-
Hill-Rom Liko® M220 / M230 Mobile Lift
Base-width Base-width adjustment on the M230 is electrically operated and on the M220 lift the base is easily widened with a pedal....
-
Pilot Rock BPR1 Bear Resistant Trash Receptacle
Receptacle sits up off the ground for extended service life. STANDARD EQUIPMENT: Includes 36-gallon heavy duty rigid plastic liners. ...
-
New Construction
In Sec. 35.152(c) of the NPRM, the Department proposed language based on Option 2, providing that when cells are altered, a covered entity may satisfy its obligation to provide the required...
-
Costs and Benefits
Tier I models costs for a large transit entity that is on the “smaller” end of the size spectrum (e.g., 130 buses operating in annual maximum fixed route service), while Tier III reflects...
