Section 4.34.6 requires a clearance between opposing base cabinets, counters, appliances, or walls of at least 40 inches except in a U-shaped kitchen where the minimum clearance is 60 inches...
Search Results "Web-Based Service"
-
Kitchens and Kitchenettes
-
Section 1630.10(b)—Qualification Standards and Tests Related to Uncorrected Vision
Section 1630.10(b)—Qualification Standards and Tests Related to Uncorrected Vision This provision allows challenges to qualification standards based on uncorrected vision, even where...
-
Introduction
Communities are best understood by their own residents—a fact that makes community-based emergency planning and response highly effective....
-
Current industry standard practices resulting from this project
The research was conducted by the University of Pittsburgh Human Engineering Research Laboratory and was based on exposure limits of vibration to the human body established in ISO 2631,...
-
Character Spacing: ADA Standard Section 703.2.7
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
Dimensions and Capitalization: ADA Standard Section 703.3.1
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
Dispersion: ADA Standard Section 235.2.1
Section 235.2.1 covers scoping requirements in the current ADA Standards for dispersion of boat slips.
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
Re: Section 307 Protruding Objects
Yes, it is a protruding object hazard based solely on section 307, but so is the (code compliant) lavatory with its (required) 29" high front edge, and the 8" deep (code compliant) shelf...
-
Magnuson Group KOBE Hook
Post color can be different than base, umbrella ring and hook support. Post, base, umbrella ring and hook support in Silver, White, Black, Sand, Chocolate or Green....
-
Mockett CH11 Longhorn Coat Hook
Size: 5 9/32" wide, 1 31/32" base diameter, 1 25/32" projection. Mounting hardware included. Finish: Base is Polished Chrome....
-
BEA Inc. LZR-Microscan Swinging Door Sensor
The LZR-microscan automatically adapts and adjusts its detection zones based on the door's position, ensuring complete and consistent safety. ...
-
M305.3.2 Height
The height of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
A4.2.4 CLEAR FLOOR OR GROUND SPACE FOR WHEELCHAIRS
The space requirements in this standard are based upon maneuvering clearances that will accommodate most larger wheelchairs. Fig....
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances....
-
§ 38.159(a)(2) Exception
If portable or station-based lifts, ramps or bridge plates meeting the applicable requirements of this section are provided at stations or other stops required to be accessible under regulations...
-
11B-228.3.2.1 Public use or common use EVCS
EVCS are not addressed by 2010 ADAS, although a case could be made, based on the general obligation for governments to make their services, programs or activities available to individuals...
-
New Construction
In Sec. 35.152(c) of the NPRM, the Department proposed language based on Option 2, providing that when cells are altered, a covered entity may satisfy its obligation to provide the required...
-
Grohe Veris F-digital Basin Mixer Faucet
Steel Braided Flexible Supplies Requires: • Built-in power supply 36 078 000 or plug-in power supply 65 912 000 • Digital Controller - intuitive multi-functional operating unit web...
-
Costs and Benefits
Tier I models costs for a large transit entity that is on the “smaller” end of the size spectrum (e.g., 130 buses operating in annual maximum fixed route service), while Tier III reflects...
