accessible buildings Assign aides to beneficiaries or home visits Delivery of services at alternate, accessible sites Alteration of existing facilities Construction...
Search Results "Pre-Construction Meeting"
-
METHODS OF COMPLIANCE IN EXISTING FACILITIES {35.150}
-
§ 36.304(d)(2)(ii)(A)
Noncomplying newly constructed and altered elements may also be subject to the requirements of §36.406(a)(5)....
-
Standard Forest Service National Trail Specifications
The engineering management publication "Standard Specifications for Construction and Maintenance of Trails" (EM–7720–103) provides a uniform set of specifications for contracted trail work...
-
L.
were approved by the Texas Department of Licensing and Regulation as accessible under the Texas Accessibility Standards, state accessibility regulations certified by the United States as "meeting...
-
M301.4 Lift Compatibility
EXCEPTION: Where fixed overhead patient lifts are provided, and when their use with diagnostic equipment is permitted by an enforcing authority, diagnostic equipment shall not be required to meet...
-
M302.4 Lift Compatibility
EXCEPTION: Where fixed overhead patient lifts are provided, and when their use with diagnostic equipment is permitted by an enforcing authority, diagnostic equipment shall not be required to meet...
-
Dressing, Fitting, or Locker Rooms
Operating mechanisms provided on accessible lockers must also meet ADAAG provisions for their operation and height....
-
STEP 2 Determine what is needed
STEP 2 Determine what is needed In some cases, the accessibility guidelines will require additional play components to be provided to meet the minimum requirements. ...
-
5. When Is It Important for My Client to Request a Reasonable Accommodation?
Because an employer does not have to excuse failure to meet production standards that are consistently applied, even if the difficulty was caused by a health condition or the side effects...
-
§ 37.42(d)(2)
(2) The railroad operator must submit a plan to FRA and/or FTA, describing its proposed means to meet the performance standard of paragraph (a) of this section at that station....
-
Standard Units
It is important that cantilevered units meet the requirements for protruding objects so they do not pose a hazard to people with vision impairments....
-
Are curved or circular ramps allowed?
Ramps without level landings at changes in direction typically will not meet the Standards due to resulting compound slopes....
-
§ 37.42(d)(2)
(2) The railroad operator must submit a plan to FRA and/or FTA, describing its proposed means to meet the performance standard of paragraph (a) of this section at that station....
-
Mark Hulme
Even in new construction, overlapping requirements can bewilder owners, designers, architects, and engineers....
-
Balco FMS-A and FMS-V Roll-Up Floor Mat
Balco's Premium Roll-Up Mat is a Vinyl Hinge Construction with Standard Mill Finish Aluminum; Clear Anodized, and Medium Bronze Anodized Finishes Available....
-
3001.1 Scope
This chapter governs the design, construction, installation, alteration and repair of elevators and conveying systems and their components....
-
[A] BUILDING
Parking lots, play areas, patios, constructed trails, man-made outdoor areas are often not considered to be buildings. ...
-
Sec.36.607(a)(2)
By the same token, certification would not be relevant to construction of a facility for children, if the regulations against which equivalency is measured do not address children's facilities...
-
243 Shooting Facilities with Firing Positions
with Firing Positions Sections 243 and 1010 of the 2010 Standards require an accessible turning space for each different type of firing position at a shooting facility if designed and constructed...
-
4(5)
(5) Exterior deck, patio, or balcony surfaces are no more than 1/2 inch below the floor level of the interior of the dwelling unit, unless they are constructed of impervious material such...
-
§ 35.151(b)(4)(ii)(C) Safe harbor
If a public entity has constructed or altered required elements of a path of travel in accordance with the specifications in either the 1991 Standards or the Uniform Federal Accessibility...
-
§ 36.304(d)(2)(ii)(B)
Noncomplying newly constructed and altered elements may also be subject to the requirements of §36.406(a)(5)....
-
D4. Door Clearance
[ADA Stds 4.13.6, figure 25] Note: The maximum threshold height is 1/2 inch for new construction....
-
Exceptions to the Guidelines That Apply to Beach Access Routes
Document the reason that full compliance wasn't achieved and file it with the project records for the construction or alteration project....
