In multi-story buildings where stories are located above or below the level of exit discharge, evacuation elevators can be used as part of an accessible means of egress....
Search Results "Destination-Oriented Elevator"
-
Egress [4.1.3(9), 4.3.10]
-
11B-703.5.6 Height from finish floor or ground
Visual characters indicating elevator car controls shall not be required to comply with Section 11B-703.5.6. 2....
-
11B-407.4.9 Emergency communication
Emergency two-way communication systems between the elevator and a point outside the hoistway shall comply with ASME A17.1. [2010 ADAS] 407.4.9 Emergency Communication....
-
11B-407.4.9 Emergency communication
Emergency two-way communication systems between the elevator and a point outside the hoistway shall comply with ASME A17.1. [2010 ADA Standards] 407.4.9 Emergency Communication....
-
703.3.2 Position
EXCEPTION: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located either directly below or adjacent to the corresponding raised characters...
-
11B-703.3.2 Position
Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
-
Standards Applicable Under Section 504 as of March 15, 2012
Between 1/26/92 and 9/14/10 UFAS or 1991 Standards without the elevator exception....
-
11B-703.3.2 Position
Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
-
11B-703.3.2 Position
Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
-
206.2.8 Employee Work Areas
Large pieces of equipment, such as electric turbines or water pumping apparatus, may have stairs and elevated walkways used for overseeing or monitoring purposes which are physically part...
-
206.2.8 Employee Work Areas
Large pieces of equipment, such as electric turbines or water pumping apparatus, may have stairs and elevated walkways used for overseeing or monitoring purposes which are physically part...
-
206.2.7 Press Boxes
For example, if a university has a soccer stadium with three press boxes elevated 12 feet (3660 mm) or more above grade and each press box is 150 square feet (14 m2), then the aggregate...
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
Figure 21: Orientation and mobility specialist explains the APS to two individuals who will be crossing there (two APS on same pole)....
-
5.7.1.2 Lift Compatibility Clearance in Base for Imaging Equipment (M301)
This may offer flexibility over a portable lift because it can transfer the patient from either side placing the patient in the desired imaging orientation, and the ability to move completely...
-
Personal Assistants and Service Animals
Service Animals Include the ADA Service Animal Factsheet(link is external) in your event team orientation and in the materials you share with your meeting facility staff....
-
1193.23(a) (Advisory Guidance)
The requirement is outcome-oriented, and a process could range from purely conceptual to formally documented, as suits the manufacturer. 4....
-
PEMKO 4" Floor Plates/Safety Treads No. 192
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 6 1/8" Floor Plates/Safety Treads No. 193
Elevated floor plates require support ever 4" on center, at welded seams, and as necessary for support....
-
PEMKO 3" Floor Plates/Safety Treads No. 191
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 3" Floor Plates/Safety Treads No. 200
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 6-1/8" Floor Plates/Safety Treads No.19325
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 5 29/32" Floor Plates/Safety Treads No. 2266
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 9 1/2" Floor Plates/Safety Treads No. 2286
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 8" Floor Plates/Safety Treads No. 228
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
