By June Isaacson Kailes, Associate Director Center for Disability Issues and the Health Professions Western University of Health Sciences jik@pacbell.net 2008...
Search Results "Treatment Chair"
-
5 “G’s” Getting Access to Health Care for People with Physical Disabilities
-
Transfer Supports Location and Configuration M301.3 and M302.3
Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the...
-
Determine All Your Evacuation Options and Prioritize Them
wheelchair) Pros Cons You have a chance to GET OUT You and/or your helpers may be injured in the process Use of Evacuation Chairs...
-
5.3 Transfer Sides
5.3 Transfer Sides.
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
The provision will coincide with the seat area design of most examination chairs. NPRM Proposed Provision: M301.2.3 and M302.2.3 Transfer Sides....
-
5.1 Transfer Surface Height Recommendations
This height is also critical for patients who use mobility aids such as walkers and canes and may find it difficult to get up onto or down from an examination chair or table or imaging bed...
-
Midmark 625 Barrier-Free® Power Examination Table
The Midmark 625 offers all the capacity, accessibility and connectivity needed to provide excellent patient care without additional strain on you and your staff. Plus, with...
-
Midmark Ritter 223 Barrier-Free® Power Examination Table
To really care for people, you must understand the patients you care for today – and tomorrow. With an increasingly aging population, your patients may need assistance in accessing...
-
30. Treatment of students
Section 104.43 contains general provisions prohibiting the discriminatory treatment of qualified handicapped applicants....
-
5.7 Lift Compatibility
5.7 Lift Compatibility.
-
3. Ground and floor surface treatments
Ground and floor surface treatments 4.5 Accessible routes, and spaces, including floors, walks, ramps, stairs, and curb ramps....
-
M305.2.2 Length
The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2.
-
B. Information about the Aircraft
You should be familiar with and be able to provide information about aircraft accessibility for passengers with a disability when they request this information. [Secs. 382.21 and...
-
D. Stowing and Treatment of Personal Equipment
You should be familiar with the legal requirements for storage and treatment of personal equipment used by passengers with a disability, including ventilator/respirators, non-spillable batteries...
-
Features of Accessible Exam Tables
Features of Accessible Exam Tables 1. Removable/adjustable support rails with continuous gripping surfaces 2. 30” X 48” minimum clear floor space adjacent to exam table and...
-
Questions & Answers: Supplement to the 2013 DOJ/DOT Joint Technical Assistance on the Title II of the ADA Requirements To Provide Curb Ramps when Streets, Roads, or Highways are Altered through Resurfacing
U.S. Department of Justice Civil Rights Division Disability Rights Section U.S. Department of Transportation Federal Highway Administration QUESTIONS &...
-
5.4.2 Transfer Support Length for M301 and M302
5.4.2 Transfer Support Length for M301 and M302 Description: Transfer support length applies to the gripping surface of the support, that portion of the support used to grasp or...
-
M305.2 Transfer Supports (Section-by-Section Analysis)
This is an introductory section. As discussed above in Section IV.E.1. (Significant Changes – Transfer Supports), the Access Board strengthened the transfer support requirements and...
-
Inclusive Safety Briefing
elevation differences are involved, an elevator or other evacuation device might be used, or the person might be moved by other people using a cradle carry, a swing (seat) carry, or an in-chair...
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM - Preamble
The proposed standards contain minimum technical criteria to ensure that medical diagnostic equipment, including examination tables, examination chairs, weight scales, mammography equipment...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.