Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm) minimum...
Search Results "Shall"
Filters
Commonly Searched Documents
-
11B-809.10.6.4 Reinforcement for grab bars
-
11B-233.3.1.2.4 Multi-story residential dwelling units in buildings with one or more elevators
In elevator buildings, facilities with multi-story residential dwelling units shall comply with the following: The primary entry of the multi-story residential dwelling unit shall...
-
Platform Lifts: ADA Standard Section 206.7
Section 206.7 covers scoping requirements in the most current ADA Standards for accessible routes to platform lifts.
-
Toilet Compartments: ADA Standard Section 604.8
Section 604.8 covers the current ADA Standards for toilet compartments.
-
Back Support: ADA Standard Section 903.4
The bench shall provide for back support or shall be affixed to a wall....
-
11B-707.3 Operable parts
Operable parts shall comply with Section 11B-309....
-
General: ADA Standard Section 303.1
Section 303.1 of the ADA Standards covers information in the current ADA Standards for changes in level for floor and ground surfaces.
-
General: ADA Standard Section 408.1
Section 408.1 of the ADA Standards covers information in the current ADA Standards for limited-use/limited-application elevators.
-
Controls: ADA Standard Section 607.5
Section 607.5 covers the current ADA Standards bathtub controls.
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.3.2
Section 608.3.2 covers the current ADA Standards for grab bars in standard roll-in type shower compartments.
-
Grab Bars: ADA Standard Section 1009.5.7
At least one grab bar on each transfer step and the transfer platform or a continuous grab bar serving each transfer step and the transfer platform shall be provided....
-
11B-1009.5.7 Grab bars
At least one grab bar on each transfer step and the transfer platform or a continuous grab bar serving each transfer step and the transfer platform shall be provided....
-
Wall Depth and Length: ADA Standard Section 1009.4.3
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....
-
General: ADA Standard Section 809.1
Residential dwelling units shall comply with 809. Residential dwelling units required to provide mobility features shall comply with 809.2 through 809.4....
-
11B-406.5.6 Grade breaks
Grade breaks at the top and bottom of curb ramp runs shall be perpendicular to the direction of the ramp run....
-
11B-1009.4.3 Wall depth and length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (406 mm) maximum....
-
11B-206.4 Entrances
Entrances shall be provided in accordance with Section 11B-206.4....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
11B-604.6 Flush controls
Flush controls shall be hand operated or automatic....
-
11B-1009.2.7 Operation
The lift shall be capable of unassisted operation from both the deck and water levels....
-
11B-216.10 Assistive listening systems
The sign shall include wording that states “Assistive-Listening System Available” and shall be posted in a prominent place at or near the assembly area entrance....
-
Power Operation: ADA Standard Section 409.3.1
Section 409.3.1 covers the current ADA Standards for the power operation of private residence elevator doors.
-
Seats: ADA Standard Section 608.4
Section 608.4 covers the current ADA Standards for seats in shower compartments.
-
Clearances: ADA Standard Section 1002.4.4
Clearances for wheelchair spaces shall comply with 1002.4.4. EXCEPTIONS: 1. Where provided, securement devices shall be permitted to overlap required clearances. 2....