Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
Search Results "Qualification Standard"
Filters
Commonly Searched Documents
-
11B-706.2 Receiver jacks
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack. [ECTCR UFAS 4.33.7]...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
Can you upgrade/expand an existing location without adhering to ADA standards?
RESPONSE: No. To the extent that EVCS are a public accommodation or commercial facility they are covered by the federal law of the Americans with Disabilities Act. The new...
-
Note Regarding Comparative Table
document and in the second column, the UFAS and/or HUD Section 504 regulation provisions that would need to be complied with because the entity could not use that section of the ADA 2010 Standards...
-
I. Overview
When more than one law and accessibility standard applies, it is currently necessary for the recipient to determine on a section-by-section basis which standard affords greater accessibility...
-
Automatic and Power-Assisted Doors and Gates: ADA Standard Section 404.3
Section 404.3 covers the current ADA Standards for automatic and power-assisted doors and gates.
-
E102.6 ISO (Section-by-Section Analysis)
This is an international standard for accessible portable document format (PDF) files....
-
Architectural Barriers Act
The General Services Administration is required to issue accessibility standards for facilities covered by the Architectural Barriers Act.9 See 42 U.S.C. 4156....
-
Appendix to §36.304(d) Compliance Dates and Applicable Standards for Barrier Removal and Safe Harbor
the 1991 Standards must be modified to the extent readily achievable....
-
Chapter M3 Technical Criteria
Chapter M3 provides technical criteria for accessible diagnostic equipment based on the patient positions that the equipment is designed to support, including equipment used by...
-
[2010 ADAS] 105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
F247.1 General
The Federal Trail Data Standards classify trails by their designed use and managed use.8 A trail has only one designed use that determines the design, construction, and maintenance parameters...
-
ANSI
As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace...
-
F105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
[2010 ADAS] 105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
Figure 707.6.2 Numberic Key Layout – Drawing from the U.S. Access Board
-
Sec. 469.152. Waiver or Modification Prohibited.
The commission may not waive or modify a standard or specification if:...
-
4.10.1 GENERAL
Accessible elevators shall be on an accessible route and shall comply with 4.10 and with the American National Standard Safety Code for Elevators, Dumbwaiters, Escalators, and Moving Walks...
-
Areas for further work
various organizations that represent surface materials and professional groups the following issues were identified as parameters that might be considered in the development of any industry standards...
-
NSSN
A national resource for global standards powered by ANSI....
