Patient Load Rating: 450 lb. (204 kg) Base Height: Minimum 19" (48.3 cm) Maximum 40" (101.6 cm) Foot Section Height: With foot section retracted 15.5" to 54" (39.4...
Search Results "Patient Change Area"
Commonly Searched Documents
- Midmark 647 Barrier-Free® Power Podiatry Procedures Chair
-
Height
Access Board is considering whether 6 inches minimum and 19 inches maximum above the transfer surface would be an appropriate height for transfer supports on diagnostic equipment used by patients...
-
11B-206.2.18 Area of sport activity
An accessible route shall be provided to the boundary of each area of sport activity....
- Midmark 623 Barrier-Free® Power Examination Table
-
4. Exception from the Requirements of M301 for Certain Examination Chairs that Comply with M302
The Access Board proposed in M101.2 in the MDE NPRM to require diagnostic equipment to meet the standards for each patient position supported, meaning that if diagnostic equipment was designed...
-
11B-234.2 Load and unload areas
Load and unload areas serving amusement rides shall comply with Section 11B-1002.3....
-
11B-813.2 Features
Adult changing facilities shall provide features in compliance with Section 11B-813.2....
- Guldmann Ceiling Hoist: Basic High Comfort Sling on in Wheelchair including Lifting an Amputee
-
303.2 Vertical
Changes in level of 1/4 inch (6.4 mm) high maximum shall be permitted to be vertical....
-
303.4 Ramps
Changes in level greater than ½ inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
M303 Diagnostic Equipment Used by Patients Seated in Wheelchair
M303 provides technical criteria for diagnostic equipment used by patients seated in a wheelchair....
-
303.4 Ramps
Changes in level greater than 1/2 inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
303.4 Ramps
Changes in level greater than ½ inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
F223.1 General
Because medical facilities frequently reconfigure spaces to reflect changes in medical specialties, F223.1 does not include a provision for dispersion of accessible patient or resident sleeping...
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
M302.4 Lift Compatibility
Diagnostic equipment shall be usable with a patient lift and shall comply with M302.4.1 or M302.4.2....
-
Clearances Around Gripping Surfaces
The Access Board is considering whether 1½ inches minimum clearance around the gripping surface would be appropriate for transfer supports on diagnostic equipment used by patients in a supine...
-
Positioning Supports Considered
in a supine, prone or side-lying position, and diagnostic equipment used by patients in a seated position that can be adjusted to a reclined position....
-
Transfer Surface (M301.2 and M302.2)
The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids transfer when moving onto and off of the equipment (see defined terms in...
- Midmark 625 Barrier-Free® Power Examination Table
-
Where Ramps and Curb Ramps are Required [§303.4]
Where Ramps and Curb Ramps are Required [§303.4] Ramps and curb ramps are required along accessible routes to span changes in level greater than ½”....
-
ii. Accessible scales
Patient weight can serve as a health indicator for many conditions, including depression, diabetes, cancer, cardiovascular disease, high blood pressure, and pregnancy....