Areas Raised for Security/ Safety (§203.3) Areas raised primarily for purposes of security or life/ fire safety Examples: life guard stands, fire towers, and prison guard towers...
Search Results "Line Spacing (Raised)"
-
Areas Raised for Security/ Safety (§203.3)
-
6.9
OR b. the measurement of the vertical viewing angle (the angle between a horizontal line from the eye to the screen and a line from the eye to the top of the screen) are within the range...
-
Character Spacing: ADA Standard Section 703.5.8
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
-
Section 35.151(g)(4)
For stadium-style movie theaters, in Sec. 35.151(g)(4) of the NPRM the Department proposed requiring placement of wheelchair seating spaces and companion seats on a riser or cross-aisle...
-
10) Assembly areas
Seating must be dispersed and provide comparable lines of sight (§4.1.2(18)(a))....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations The Committee recommends standing supports located on both sides of platforms,...
-
11B-703.2.6 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character.
-
11B-703.2.6 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character.
-
Type: ADA Standard Section 407.4.7.1.1
Section 407.4.7.1.1 covers the current ADA Standards for type of designations and indicators required on elevator car control button.
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved. [2010 ADA Standards] EXCEPTION: In existing elevators, buttons shall...
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved. [2010 ADA Standards] EXCEPTION: In existing elevators, buttons shall...
-
Stroke Thickness: ADA Standard Section 703.2.6
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character.
-
11B-407.4.7.2 Keypads
The number five key shall have a single raised dot. The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1....
-
11B-407.4.7.2 Keypads
The number five key shall have a single raised dot. The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1....
-
Raised Work Areas (§203.9)
Raised Work Areas (§203.9) Employee work areas under 300 s.f. that are elevated at least 7” as an essential functional condition of the space (excluding raised courtroom stations...
-
Raised Crossings
Raised crossings, where provided, eliminate the need for curb ramps while serving to reduce traffic speeds....
-
E. Tray Slides
If cafeteria style food service lines are provided, are the tray slides no higher than 34" above the floor and queue lines at least 36" wide (42" minimum if u-turns are required) along the...
-
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations The Committee recommends standing supports located on one side of the platform,...
-
3.13(e) Unobstructed View of the Screen
Unobstructed View of the Screen All wheelchair spaces and companion seats must provide an unobstructed view to the screen, as defined in § 1.17 of this Consent Order....
-
703.2.5 Character Height
[ECTCR UFAS 4.30.4] EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch (13 mm) minimum...
-
703.2.5 Character Height
EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch (13 mm) minimum. ...
-
11B-703.2.5 Character height
Exception: Reserved [2010 ADAS] EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch...
-
4.33.3* Placement of Wheelchair Locations
When the seating capacity exceeds 300, wheelchair spaces shall be provided in more than one location....
-
A4.1.3(5)
Such conditions generally occur where it is essential to provide access to small raised or lowered areas where space may not be available for a ramp....