Structural Frame....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
Filters
Commonly Searched Documents
-
Structural Frame
-
STRUCTURAL FRAME
STRUCTURAL FRAME....
-
Structural Frame
The structural frame shall be considered to be the columns and the girders, beams, trusses and spandrels having direct connections to the columns and all other members which are essential...
-
STRUCTURAL IMPRACTICABILITY
Changes having little likelihood of being accomplished without removing or altering a load-bearing structural member and/or incurring an increased cost of 50 percent or more of the value...
-
Single Occupant Structures: ADA Standard Section 203.6
Section 203.6 covers scoping requirements of general exceptions for single occupant structures in the most current ADA Standards.
-
11B-1008.2.2 Soft contained play structures
Accessible routes serving soft contained play structures shall be permitted to use the exception in Section 11B-1008.2.2....
-
Composite Play Structure
Composite Play Structure - Two or more play structures attached or functionally linked, to create one integral unit that provides more than one play activity (ASTM F 1487-01)....
-
903.6 Structural Strength
903.6 Structural Strength....
-
1.9.1.1.1
1.9.1.1.1 All buildings, structures, sidewalks, curbs and related facilities constructed in the state by the use of state, county or municipal funds, or the funds of any political subdivision...
-
Economic and Technical Impacts
Comments are requested on the economic and technical impacts of the technical criteria in questions that follow the discussion of the technical criteria....
-
11B-203.6 Single occupant structures
Single occupant structures accessed only by passageways below grade or elevated above standard curb height, including but not limited to, toll booths that are accessed only by underground...
-
Technical Requirements for Accessible Hiker/Pedestrian Trails
Trail puncheons and trail bridges are included in the Forest Service definition of trail structures, so they must be constructed to meet the same requirements as the rest of the trail tread...
-
903.6 Structural Strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
903.6 Structural Strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
903.6 Structural Strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
1.9.1.1.4
1.9.1.1.4 With respect to buildings, structures, sidewalks, curbs and related facilities not requiring a building permit, building standards published in the California Building Standards...
-
11B-903.6 Structural strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
XI. Technical Assistance
The ADA requires that the Federal agencies responsible for issuing ADA regulations provide "technical assistance."...
-
Soft Contained Play Structures: ADA Standard Section 206.2.17.2
Section 206.2.17.2 covers scoping requirements in the most current ADA Standards for accessible routes to soft contained play structures.
-
Technical Requirements
Are the specific numbers, conditions, and measurements that are required to be achieved (percent that must comply, dimensions, reach ranges, grades, trail width, etc.).
-
Technical Requirements
The specific numbers, conditions, and measurements that are required to be achieved (percent that must comply, dimensions, reach ranges, grades, trail width, etc.).
-
11B-903.6 Structural strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
11B-903.6 Structural strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
C. Chapter 3: Technical Requirements (Section-by-Section Analysis)
In the final rule, Chapter 3 establishes the technical requirements for accessible medical diagnostic equipment based on how the diagnostic equipment is used by the patients, including:...