Where four or more public pay telephones are provided at a bank of telephones, at least one public TTY complying with Section 11B-704.4 shall be provided at that bank....
Search Results "Public Entrance"
-
11B-217.4.1 Bank requirement
-
11B-217.4.1 Bank requirement
Where four or more public pay telephones are provided at a bank of telephones, at least one public TTY complying with Section 11B-704.4 shall be provided at that bank....
-
Accessible Route to Parking Garages
Section 206.4.2 covers access to pedestrian connections between parking structures and facility entrances. In the proposed rule, this requirement referred to "parking garages."...
-
407.2.3.1 Floor Designation
Floor designations complying with 703.2 and 703.4.1 shall be provided on both jambs of elevator hoistway entrances....
- Flash Receiver (BE1442)
-
Hospitals: ADA Standard Section 217.4.6
Section 217.4.6 covers scoping requirements in the current ADA Standards for TTYs in hospitals.
-
11B-217.4.6 Hospitals
Where at least one public pay telephone is provided serving a hospital emergency room, hospital recovery room, or hospital waiting room, at least one public TTY shall be provided at each...
-
11B-217.4.6 Hospitals
Where at least one public pay telephone is provided serving a hospital emergency room, hospital recovery room, or hospital waiting room, at least one public TTY shall be provided at each...
-
Proceedings of: Workshop on Improving Building Design for Persons with Low Vision
Gupta to improve the performance of public and private buildings through excellence in design and operations....
-
Ground Floor
A building or facility always has at least one ground floor and may have more than one ground floor as where a split level entrance has been provided or where a building is built into a...
- DORMA ED100/250 Swing Door Operator
- Cal-Royal Legacy Series Locksets
- SafePath EntryLevel™ Landings
-
1.1.5 Referenced codes
The codes, standards and publications adopted and set forth in this code, including other codes, standards and publications referred to therein are, by title and date of publication, hereby...
-
11B-216.8 Toilet rooms and bathing rooms
Entrances to toilet rooms and bathing rooms shall be identified by a geometric symbol complying with Section 11B-703.7.2.6....
-
502.5 Vertical Clearance
Signs provided at entrances to parking facilities informing drivers of clearances and the location of van accessible parking spaces can provide useful customer assistance....
-
502.5 Vertical Clearance
Signs provided at entrances to parking facilities informing drivers of clearances and the location of van accessible parking spaces can provide useful customer assistance....
-
B5. Curb Ramp
Is a curb ramp provided between the vehicle pull up area and the access aisle (see figure above) or the access aisle and the accessible route (see figure on page 9) to the accessible entrance...
-
D4. Door Clearance
If No, leave the door propped open, install a power operator, or look for another accessible entrance. Yes _____ No _____...
-
Vertical Clearance
A minimum vertical clearance of 114 inches is required at passenger loading zones and along at least one vehicular route connecting accessible loading zones with site entrance and exits....
-
§ 38.95(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll) in any direction between its unloaded position and its position when...
-
§ 38.83(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll) in any direction between its unloaded position and its position when...
-
§ 38.23(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll or pitch) in any direction between its unloaded position and its position...
-
§ 38.125(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of car roll) in any direction between its unloaded position and its position when loaded...