These forces do not apply to the force required to retract latch bolts or disengage other devices that hold the door or gate in a closed position....
Search Results "POS: Point-of-Sale Device"
Commonly Searched Documents
-
11B-404.2.9 Door and gate opening force
-
11B-404.2.9 Door and gate opening force
These forces do not apply to the force required to retract latch bolts or disengage other devices that hold the door or gate in a closed position....
-
11B-404.2.9 Door and gate opening force
These forces do not apply to the force required to retract latch bolts or disengage other devices that hold the door or gate in a closed position....
- Bobrick MatrixSeries Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-5288
-
§382.133(a)
operators, as a U.S. carrier conducting passenger service you must permit any individual with a disability to use in the passenger cabin during air transportation an electronic assistive device...
-
2-3. Amend § 35.104
Amend § 35.104 by adding the following definitions of 1991 Standards, 2004 ADAAG, direct threat, existing facility, other power-driven mobility device, proposed standards, service animal...
-
1008.1.9.7, Item 5
A sign shall be provided on the door located above and within 12 inches (305 mm) of the release device reading: “KEEP PUSHING....
-
A4.11 PLATFORM LIFTS
Platform lifts include porch lifts and other devices used for short-distance, vertical transportation of people in wheelchairs....
-
§ 37.161(a)
These features include, but are not limited to, lifts and other means of access to vehicles, securement devices, elevators, signage and systems to facilitate communications with persons...
-
11B-602.3 Operable parts
activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic electronically controlled device...
-
Public Entrances
Where multiple public entrances are planned to serve different site arrival points, the 1991 Standards, at section 4.1.2(1), and section 206.2.1 of the 2010 Standards require at least one...
-
StaLok
After the heavy rainfall, the only noticeable factor was pooling of the water on the lower points of the surface; StaLok is impervious so it repels the water....
-
R204 Pedestrian Access Routes (Section-by-Section Analysis)
Pedestrian access routes in the public right-of-way also connect to accessible routes at building and facility site arrival points.27 Pedestrian access routes must be provided within:...
-
Accessible Slopes
Put one end at the high point of the surface and raise the other end so that the bubble is in the middle of the level’s gauge. The level is now level....
-
11B-216.6 Entrances
Directional signs are needed where the accessible route diverges from the route for the general public and should be located at decision points (for example where the path to the stairs...
- Horton HD-Storm™ 70/80/85 PSF Belt Drive
-
7.2 Technological and Scientific Considerations
Most MRI devices today have magnetic fields of 1.5 T (Tesla) and greater....
-
Sub-Committee Summary of Scope for Recommendations
It is sometimes difficult to take the weight of patients who have mobility or stability issues or for those who use wheeled mobility devices....
-
11B-604.5.1 Side wall
SIDE WALL GRAB BAR AT WATER CLOSETS ETA Editor's Note At Hospital toilets and bathrooms used by patients, the 2013 California Electrical Code (2013 CEC) requires a nurse call device...
-
2. Types of Telephone Emergency Services Covered
In these situations, a primary PSAP is the initial 9-1-1 answering point. It transfers calls to secondary PSAPs, such as fire or emergency medical services....
-
Accessible Route to Parking
Some comments pointed out that the ANSI A1171.1 standard, like the original ADAAG, specifies that "parked vehicle overhangs shall not reduce the clear width of an accessible route."...
-
Accessible Routes at Security Barriers
Section 206.8 requires that an accessible route or accessible means of egress be maintained where security barriers or check points are provided....
-
Q3.) What are the types of “manufacturing processes” that were anticipated where the advisory says “tolerances recognized by this provision include… “those that may be a necessary consequence of a particular manufacturing process”?
To simplify the tolerance assessment, the 2010 Standards specify that the shower compartment be measured at the center points of opposing sides but the expectation is that the width at the...
-
6. What if there's no way I can do my regular job, even with an accommodation?
functions of your job to normal standards and have no paid leave available, you still may be entitled to unpaid leave as a reasonable accommodation if that leave will help you get to a point...