The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....
Search Results "Adjustable Height Exam Table"
-
407.4.7.2 Keypads
-
Reasonable Accommodation
"(3)There are three categories of "reasonable accommodations": "(i) modifications or adjustments to a job application process that enable a qualified applicant with a disability to be...
-
§100.303(b)
(b) The following examples illustrate the application of paragraph (a) of this section: Example (1): John and Mary apply for housing at the Vista Heights apartment complex which is an...
-
3.3.15.2 Side (lateral) reach - unobstructed
reach - unobstructed For WhMD users in our study that could perform a reach task, over 90% of each of the WhMD user groups could reach beyond the lateral most point of their WhMDs for heights...
-
Stopping Distance
Table 14 shows that the mean perception-reaction time for bicyclists was 0.9 seconds....
-
502.3.1 Object Information (Section-by-Section Analysis)
Moreover, user-adjustable states would be required to be set programmatically, including through assistive technology....
-
Paragraph (c) (Advisory Guidance)
Depending upon the product, the manufacturer may also be able to allow users to adjust colors to match their preferences and visual abilities. d. Avoid colors with a low luminance....
-
§382.65(c)(2)
(2) The chair must be designed to be compatible with the maneuvering space, aisle width, and seat height of the aircraft on which it is to be used, and to be easily pushed, pulled, and turned...
-
M305.3.2.2 Vertical Position
The height of the lowest end of the gripping surface on vertical standing supports shall be 34 inches (865 mm) minimum and 37 inches (940 mm) maximum above the standing surface....
-
11B-812.7.3 Lettering
The words “NO PARKING” shall be painted on the surface within each access aisle in letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
-
§ 37.13(b)
(b) The vehicle door height requirements for vehicles over 22 feet identified in §38.25(c) of this title apply to solicitations for vehicles under this part after January 25, 1992....
-
11B-812.7.3 Lettering
The words “NO PARKING” shall be painted on the surface within each access aisle in letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
-
§ 36.303(g)(4)(ii)
paragraph (g)(4)(i) of this section by using the existing assistive listening receivers that the public accommodation is already required to provide at its movie theaters in accordance with Table...
-
§ 36.303(g)(4)(ii)
paragraph (g)(4)(i) of this section by using the existing assistive listening receivers that the public accommodation is already required to provide at its movie theaters in accordance with Table...
-
SUPPLEMENTARY INFORMATION:
Table of Contents for Preamble 1. New Format for Guidelines 2. Executive Summary 3. Statutory and Regulatory Background 4. Changes Made to the Proposed Rule 5....
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1003.2.12.2 Opening limitations
Open guards shall have balusters or ornamental patterns such that a 4-inch-diameter (102mm) sphere cannot pass through any opening up to a height of 34 inches (864mm)....
-
1.3.2 Focus Following NPRM Comments
This review identified four major issue areas for the MDE Advisory Committee to address, as follows: Transfer surface height and size Permitted obstructions to the transfer surface...
-
T502.4 Doorways with Steps on Over-the-Road Buses
The door opening clear width above a height of 48 inches (1220 mm) measured from the lowest step tread shall be permitted to taper so as to reduce in width to 18 inches (457 mm) minimum....
-
Tactile wayfinding
A Braille trail has a rope at waist height for a person with vision loss to follow and Braille labels for information....
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
11B-411.2.1.2.3 Accessibility function button
The International Symbol of Accessibility shall comply with Section 11B-703.7.2.1, and shall be 5/8 inch (15.9 mm) minimum in height. The indication shall be three raised dots....
-
SafePath: ADA Door Access - What is a Level Landing?
Understanding what the ADA requirements are for door threshold height modification and the products that are available for building and disability access code compliance....
-
EZCurb Ramp - Vertical Barrier Removal Instructional Video
Understanding what the ADA requirements are for door threshold height modification and the products that are available for building and disability access code compliance....
