[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
Search Results "Court Floor Holding Cell"
Filters
Commonly Searched Documents
-
11B-407.2.1.1 Height
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
Public entities may not discriminate or impose eligibility criteria to screen out people with disabilities
corrections, and justice system leaders have facilitated compliance with this obligation: Forbade use of non-essential eligibility criteria in diversion or re-entry programs that courts...
-
32.1 Q. What types of penalties or monetary damages will be assessed if covered multifamily dwellings are found not to be in compliance with the Fair Housing Act?
Further, a Federal district court judge can order similar relief plus punitive damages as well as civil penalties for up to $100,000 in an action brought by a private individual or by the...
-
22. Enforcement
Counsel may seek to enforce the terms of this Settlement Agreement through the dispute resolution process provided for in Section 19 above, up to and including a motion before the District Court...
-
C. Defendants' Transaction Counter
The submissions from the Court and the parties do not clearly state the length of the transaction counter as built. See id....
-
III-8.5000 Attorney's fees
The defendant, however, may not recover attorney's fees unless the court finds that the plaintiff's action was frivolous, unreasonable, or without foundation, although it does not have to...
-
15(c)
Any unresolved disputes under this section may be submitted by either Party to the Court within 30 days after the dispute resolution period ends....
-
Q. How are the employment provisions enforced?
Remedies may include hiring, reinstatement, back pay, court orders to stop discrimination, and reasonable accommodation....
-
Overhead Lifts
Overhead lifts and portable floor lifts are used in health care facilities, and the technical criteria should not be viewed as preferring portable floor lifts....
-
217.4.2.1 Public Buildings
Where at least one public pay telephone is provided on a floor of a public building, at least one public TTY shall be provided on that floor....
-
217.4.2.2 Private Buildings
Where four or more public pay telephones are provided on a floor of a private building, at least one public TTY shall be provided on that floor....
-
Examples of Accessible Features for Websites
When tables with header and row identifiers are used to display information or data, the header and row information should be associated with each data cell by using HTML so a person using...
-
11B-217.2 Wheelchair accessible telephones
TABLE 11B-217.2 WHEELCHAIR ACCESSIBLE TELEPHONES NUMBER OF TELEPHONES PROVIDED ON A FLOOR, LEVEL, OR EXTERIOR SITE MINIMUM NUMBER OF REQUIRED WHEELCHAIR...
-
11B-217.2 Wheelchair accessible telephones
TABLE 11B-217.2 WHEELCHAIR ACCESSIBLE TELEPHONES Number Of Telephones Provided On A Floor, Level, Or Exterior Site Minimum Number Of Required Wheelchair Accessible Telephones...
-
4.34.6.5(1)
(1) The sink and surrounding counter shall be mounted at a maximum height of 34 in (865 mm) above the floor, measured from the floor to the top of the counter surface, or shall be adjustable...
-
Car Controls
...are the highest floor control buttons in the elevator(s) mounted within 54" of the floor, with associated raised letters and Braille characters?...
-
5c.
Are the highest floor control buttons in the elevator cab mounted no more than 54 inches above the floor for a side reach or 48 inches for forward reach? Yes _____ No _____...
-
§ 38.95(d) Mobility aid seating location
Spaces for persons who wish to remain in their wheelchairs or mobility aids shall have a minimum clear floor space 48 inches by 30 inches....
-
Overview
Ordinarily, the accessibility dimensions are static and measured from a static element such as the floor....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....