The device shall be activated by sensing an obstruction passing through the opening at 5 inches (125 mm) nominal and 29 inches (735 mm) nominal above the finish floor....
Search Results "Ceramic Tile Flooring"
Commonly Searched Documents
-
407.3.3.1 Height
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
A4.23.9 Medicine Cabinets
Shelves, drawers, and floor-mounted cabinets can be provided within the reach ranges of disabled people....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3. ...
-
4.15.2* SPOUT HEIGHT
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
4.34.6.5(5)
The finished flooring shall extend under the counter to the wall....
-
A4.23.9 MEDICINE CABINETS
Shelves, drawers, and floor-mounted cabinets can be provided within the reach ranges of disabled people....
-
M303.4.1 Breast Platforms
The height of the breast platform shall be 30 inches (760 mm) high minimum and 42 inches (1065 mm) high maximum above the floor when in use by a patient seated in a wheelchair....
-
Handrail Extensions [§505.10]
Handrail Extensions [§505.10] Handrail extensions at the top and bottom must return to walls, guards, or floors and horizontal portions must comply as protruding objects....
-
Location Above Detectable Elements
Objects located above elements that are within can sweep can protrude 4” maximum from the leading edge of such elements provided that any required reach or clear floor space is not obstructed...
-
11B-813.2.6 Shelf
No fewer than one shelf shall be provided in close proximity to the changing table at 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
Picnic Tables
In addition to the clear floor or ground space for each wheelchair seating space, provide a 48-inch (1,220-millimeter) clear floor or ground space around the usable portions of the table...
-
Fire Rings, Grills, Fireplaces, and Wood Stoves
The slope of the clear floor or ground space must not exceed 1:48 (2 percent) in any direction....
-
4.1.3 Adjustable Height Chairs with and without Footplates
4.1.3 Adjustable Height Chairs with and without Footplates Patients seated in adjustable height examination chairs typically rest their feet on the floor or on a footplate or have their...
-
How should we describe facilities that only meet some of the accessibility guidelines?
For instance, you can let people know that the main floor of the office is accessible but other floors can be reached by stairway only, and provide instructions on how to visit someone whose...
-
212 and 606 Kitchens, Kitchenettes, Lavatories, and Sinks
The technical requirements address clear floor space, height, faucets, and exposed pipes and surfaces....
-
Outdoor Rinsing Showers
Both showers must meet the clear floor and ground space and outdoor recreation access route requirements that follow....
-
Lift Compatibility (M301.4 and M302.4)
Portable floor lifts have legs with wheels that need to fit under or around the base of the diagnostic equipment....
- Neo-Metro Commercial Metaal Toilet 8956 Series
- Neo-Metro Contour Commercial Stainless Steel Toilet 8955 Series
-
An example of an "undue burden" and how it might be solved is:
An example of an "undue burden" and how it might be solved is: In a small municipality, the town council holds its public meetings in an auditorium on the second floor of an historic...
-
1136A.1 Receptacle heights
inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished floor...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...