Building/life safety codes set minimum distances between rows of fixed seats with consideration of the number of seats in a row, the exit aisle width and arrangement, and the location of...
Search Results "Seat Height"
-
A4.33.3 Placement of Wheelchair Locations
-
221 Assembly Areas
seating (221.5)....
-
Attachment G: Modifications to Newly Constructed Facilities
Attachment G: Modifications to Newly Constructed Facilities
-
Medical Device Manufacturers
Many medical device manufacturers currently incorporate accessible features in some of their products such as patient support surfaces that are height adjustable, transfer and positioning...
-
Wheelchair Storage Space: ADA Standard Section 1002.5.4
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
Ticket Transfers and Secondary Ticket Market
Venues cannot require that accessible seats only be transferred to someone with a disability....
-
221.2.3.2 Vertical Dispersion
or other movable structures in an area where fixed seating is not provided, in order to increase seating for an event, wheelchair spaces and companion seats may be placed in that section...
-
Grab bars
This standard gives the grab bar height range of 4 to 6 inches from the wall to the top of the gripping surface....
- Pilot Rock WPTS Square Frame Table Using Recycled Plastic
- Pilot Rock WPTS Square Frame Table Using Lumber
- University of Michigan Transportation Research Institute
- Lifeguard Above-Ground Spa Lift LSL #100275
-
E.
In Cinemark's auditoria with more than 300 seats, patrons may use elevators to access some of these seats on risers....
-
Thresholds [§404.2.5]
Thresholds [§404.2.5] The height of thresholds is limited to 1/2” in new construction. The edge must be beveled 1:2 maximum above a height of 1/4”....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
Facility sell-out. (Section-by-Section Analysis)
Proposed § 36.302(f)(6)(i) allows for the release of unsold accessible seating once standard seats in the facility have been sold, but luxury boxes, club boxes, or suites are not required...
-
Facility sell-out. (Section-by-Section Analysis)
The approach in §35.138(f)(1) allows for the release of unsold accessible seating once standard seats in the facility have been sold. ...
-
§ 36.308(a)(1)(i)
(i) Provide a reasonable number of wheelchair seating spaces, companion seats, and designated aisle seats; and...
-
219.3 Receivers
over 50 seats¹ 2 201 to 500 2, plus 1 per 25 seats over 50 seats¹ 1 per 4 receivers¹ 501 to 1000...
-
§ 36.308(c)(2) Group ticket purchases
In assembly areas with seating capacities exceeding 5,000, designate at least three companion seats for each of five wheelchair seating spaces in order to provide more flexible seating arrangements...
-
11B-306.3.4 Clearance reduction
inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches (152 mm) in height...
-
11B-306.3.4 Clearance reduction
inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches (152 mm) in height...
-
Bathtub Enclosures: ADA Standard Section 607.7
Section 607.7 covers the current ADA Standards for bathtub enclosures.