B-279 ClassicSeries® Surface-Mounted Waste Receptacle Satin-finish stainless steel. Bottom edges hemmed for safety....
Search Results "Ground Surface"
Filters
Commonly Searched Documents
-
Bobrick B-279 ClassicSeries® Surface-Mounted Waste Receptacle
-
Bobrick TrimLineSeries ADA Surface-Mounted Hand Dryer B-7128.115V
Durable, 22-gauge galvanized steel with exposed surface, type 304 satin-finish stainless steel cover having #4 satin-finish vertical grain with black plastic trim, automatic sensor, dual...
-
Clear Tread Width of Trails
Clear tread width is the width of traveled surface between obstacles on the ground and above the ground (figure 129). Provide at least 36 inches (915 millimeters) of clear tread width....
-
1015.1 General
The technical requirements address the clear ground space (1015.2) and viewing space (1015.3) at distinct viewing locations; the turning space within viewing areas (1015.4); and the surface...
-
4.5.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
11B-233.3.1.2.3 Ground floors above grade
Where the first floor in a building containing residential dwelling units is a floor above grade, all units on that floor shall be adaptable.
-
6. More Than One Ground Floor
[See subsections ...]
-
11B-233.3.1.2.3 Ground floors above grade
Where the first floor in a building containing residential dwelling units is a floor above grade, all units on that floor shall be adaptable.
-
308.3.1 Unobstructed
reach shall be 15 inches (380 mm) minimum above the finish floor or ground....
-
308.3.1 Unobstructed
reach shall be 15 inches (380 mm) minimum above the finish floor or ground....
-
308.3.1 Unobstructed
reach shall be 15 inches (380 mm) minimum above the finish floor or ground....
-
11B-308.3.1 Unobstructed
reach shall be 15 inches (381 mm) minimum above the finish floor or ground. ...
-
904.4.1 Parallel Approach
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
904.4.1 Parallel Approach
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
Armor-Tile Tactile Systems Cast In Place Detectable Warning Surface System
Armor-TileTM Cast in Place is the world leader in tactile walking surface indicators systems....
-
4.6.3 Eyepiece
or periscope that is usable from a seated position for viewing each point of interest shall be positioned 43 inches (1090 mm) minimum and 51 inches (1295 mm) maximum above the floor or ground...
-
Picnic Tables
The surface of the clear floor or ground space must be firm and stable. The type of surfacing used should be appropriate to the setting and level of development....
-
Bobrick TrimLineSeries ADA Surface-Mounted Hand Dryer B-7128.230V
Durable, 22-gauge galvanized steel with exposed surface, type 304 satin-finish stainless steel cover having #4 satin-finish vertical grain with black plastic trim, automatic sensor, dual...
-
4.32 SEATING, TABLES, AND WORK SURFACES
[See subsections ...]
-
4.29.2* TACTILE WARNINGS ON WALKING SURFACES
(Reserved).
-
A4.29.2 TACTILE WARNINGS ON WALKING SURFACES
(Reserved).
-
A4.32 SEATING, TABLES, AND WORK SURFACES
[See subsections ...]
