Where raised pedestrian street crossings, depressed corners, or other level pedestrian street crossings are provided, detectable warning surfaces shall be placed at the flush transition...
Search Results "Raised Area"
Filters
Commonly Searched Documents
-
R305.2.3 Blended Transitions
-
4.13.8* THRESHOLDS AT DOORWAYS
Raised thresholds and floor level changes at accessible doorways shall be beveled with a slope no greater than 1:2 (see 4.5.2)....
-
§ 38.161 Moveable aisle armrests
A minimum of 50% of aisle seats, including all moveable or removable seats at wheelchair or mobility aide securement locations, shall have an armrest on the aisle side which can be raised...
-
Issue 10: Braille (right side up?)
Remedy: Braille is made up of small dots in a grid which are raised on the surface to be read by fingertip....
-
CONCLUSION
CONCLUSION Defendants’ raised porches violate both the letter and the spirit of the ADA. ...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
For example, the geometric symbol may be used as the sign background with raised characters and Braille per Sections 11B-703.2 and 11B-703.3. ◼...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
1009.2.4 Seat Height
height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
I. Final
In the event that no objections to this Settlement Agreement are raised prior to or at the Fairness Hearing, that any objections that have been raised have been fully and formally withdrawn...
-
4.20.4 Grab Bars
Nonetheless, in both conditions, grab bars are located to help individuals get into the tub and then to lower and raise themselves to and from a seated position....
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
Takeform Fusion Signage Floor Directional Type B
Directional headers have raised copy. A slide-in printed insert enables the sign to be easily updated....
-
11B-206.3 Location
Accessible routes shall coincide with or be located in the same area as general circulation paths....
-
PATH OF TRAVEL
area with an exterior approach (including sidewalks, streets, and parking areas), an entrance to the facility, and other parts of the facility....
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
-
Takeform Fusion Signage Floor Directional Type B.2
Directional headers have raised copy. A slide-in printed insert enables the sign to be easily updated....
-
11B-705.1.2.4 Bus stops
When detectable warnings are provided at bus stop boarding and alighting areas, the detectable warnings shall extend the full width of the boarding/alighting area and shall be 36 inches...
-
Detention and Correctional Facilities: ADA Standard Section 217.4.8
Section 217.4.8 covers scoping requirements in the current ADA Standards for TTYs in detention and correctional facilities.
-
11B-217.4.8 Detention and correctional facilities
In detention and correctional facilities, where at least one pay telephone is provided in a secured area used only by detainees or inmates and security personnel, at least one TTY shall...
