Towels load into bottom of cabinet concealed behind wall or mirror; only the towel tray is visible....
Search Results "Curb Ramp Bottom Landing"
Commonly Searched Documents
- Bobrick Recessed Paper Towel Dispenser B-318
- Harmar EPL Enclosed Vertical Platform Lift
- Signaids App to Use with Signaids Signs
- GameTime Rock N Raft Play Component
-
M305.2.6 Gripping Surfaces (Section-by-Section Analysis)
The Committee recommended requiring the bottom of the transfer support to have no obstructions affecting more than 20 percent of the transfer support’s length. Id....
-
Horse Accessible Gates
The bottom log should be removed from the gate shown in figure 6 because the log could be a tripping hazard and it prevents wheelchair access....
-
404.2.7 Door and Gate Hardware
existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom...
-
404.2.7 Door and Gate Hardware
existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom...
-
Resting Intervals [1016.8]
Resting intervals are required at the top and bottom of an ORAR section any time the running slope exceeds 1:20 (5 percent)....
-
404.2.7 Door and Gate Hardware
existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom...
-
Utility Sinks
Ensure that the height of the counter or rim surrounding the utility sink is not more than 34 inches (865 millimeters) above the ground or floor space and that the bottom of the bowl is...
-
1136A.1 Receptacle heights
communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom...
- USDA Forest Service Built Environment Image Guide (BEIG)
-
§ 38.159(a)(1) General
., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances to permit a wheelchair or other mobility aid user to reach a securement location....
- Panda US-51 All Aluminum ULTRA Folding Door System
- American Specialties Angle Frame Mirror 0600
- Gamco Surface-Mounted Paper Cup Dispenser - CD-1
- On My Own, Inc. - Nevada and Collins, MO
- PEMKO 5" Latching Panic Saddle Threshold No. 2705-T
- AD Systems’ Officefronts
-
§382.95(a)
services of personnel and the use of ground wheelchairs, accessible motorized carts, boarding wheelchairs, and/or on-board wheelchairs where provided in accordance with this part, and ramps...
-
1.1.2 Walks
Measure walks and other non - ramp pedestrian surfaces for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with 1.1.3...
-
§ 38.159(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll or pitch) in any direction between its unloaded position and its position...
-
§ 38.93(d)(3) Exception
horizontal gap or vertical alignment specified in paragraph (d)(1) or (d)(2) of this section, car, platform or portable lifts complying with §38.95(b) of this part, or car or platform ramps...