Where automatic teller machines or self-service fare vending, collection, or adjustment machines are provided, at least one of each type provided at each location shall comply with 707....
Search Results "Adjustable Height Exam Table"
-
220.1 General
-
2.2.3 Functional Reach
Those individuals unable to grasp and/or lift any of the cylinders above shoulder height did not complete the reaches....
-
III-7.5175 Fixed seating
At least five percent of fixed or built-in seating or tables must be accessible....
-
11B-703.8.7 Character spacing
Low resolution VMS character spacing shall comply with the pixel count for character spacing in Table 11B-703.8.5....
-
11B-409.4.7.2 Operable parts
The telephone and emergency signaling device shall comply with Sections 11B-309.3 _|Operable Parts; Height|_ and 11B-309.4 _|Operation|_....
-
11B-409.4.7.2 Operable parts
The telephone and emergency signaling device shall comply with Sections 11B-309.3 _|Operable Parts; Height|_ and 11B-309.4 _|Operation|_....
-
§ 37.43(e)(2)(iii)
., relocation of phones to an accessible height, installation of amplification devices or TDDs);...
-
11B-703.2.6 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character....
-
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor....
-
Landscape Forms Inc. Olithas Outdoor Bench
Some of life’s best experiences happen outdoors and the Olithas table and bench for Terrace Life create a magnetic field for social life on terraces, patios, roof gardens and other special...
-
11B-407.4.1 Car dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Table 11B-407.4.1....
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
11B-219.3 Receivers
Receivers complying with 706.2 shall be provided for assistive listening systems in each assembly area in accordance with Table 219.3....
-
11B-407.4.1 Car dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Table 11B-407.4.1....
-
7.4. Costs to Impacted Small Entities
Table 7-3 presents estimates of the percentage of movie theaters by venue type, calculated from the 2015 distribution of auditoriums by venue type (Table 3-3) and the average number of auditoriums...
-
Material Characteristics (slide 6)
I knew there was a game room, so I asked them, “Why are you playing [in the craft room] with these tables?”...
-
11B-703.8.6 Stroke width
Low resolution VMS characters shall comply with the pixel count for stroke width in Table 11B-703.8.5....
-
11B-703.8.6 Stroke width
Low resolution VMS characters shall comply with the pixel count for stroke width in Table 11B-703.8.5....
-
11B-809.8 Doors
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than 1/2 inch (12.7 mm) of change in height between floor surfaces....
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
Clear Floor or Ground Space: ADA Standard Section 407.2.1.3
Section 407.2.1.3 covers the current ADA Standards for the clear floor or ground space at elevator call controls.
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
Employee Work Areas [§203.9]
Some public use spaces also function as work spaces, such as medical exam rooms and classrooms....
-
SLOPE Waste Receptacles
Available in both a standard height 38-gallon and a “junior height” 32-gallon unit, SLOPE features 3 single top openings [waste, recycling & paper] and 5 double-top openings [combinations...
