The access aisle must be marked to discourage parking in the aisle and comply with the technical requirements for surfaces (see R302.7)....
Search Results "Parking Slope"
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
-
H. After Completing the Survey and Checklist
Emergency shelters in older buildings with inaccessible features might be made accessible with temporary modifications, (such as portable ramps at the entrance and accessible parking spaces...
-
Special thanks to:
And special thanks to Jennie Albrinck (Grand Canyon National Park, NPS) for her coordination of the Focus Group for Universally Accessible Wayside Exhibits with persons who are blind....
-
4.3.2 LOCATION
(1) At least one accessible route within the boundary of the site shall be provided from public transportation stops, accessible parking, and accessible passenger loading zones, and public...
-
Comments on specific provisions of proposed ADAAG (Section-By-Section Analysis and Response to Comments)
Those areas that elicited the heaviest response included assistive listening systems, automated teller machines, work areas, parking, areas of refuge, telephones (scoping for TDD's and volume...
-
[2010 ADAS] 105.2 Referenced Standards
ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016-5990 Standard Reference Number Title Referenced in code section number...
-
Handrails Requirement
., those with running slopes no steeper than 1:20), meet the technical criteria in section 505....
-
Maneuvering Space
permits individuals with mobility devices to turn around A 60-inch (1525 mm) T-Shaped turn allows an individual to change directions by making a series of multi-point turns Slope...
-
R302.5 Grade
Running slope requirements are contained in R304.2.2 for perpendicular curb ramps, in R304.3.2 for parallel curb ramps, in R304.4.1 for blended transitions, and in R407.2 for ramps....
-
R302.7.2 Vertical Surface Discontinuities
Vertical surface discontinuities between 6.4 mm (0.25 in) and 13 mm (0.5 in) shall be beveled with a slope not steeper than 50 percent....
-
4.33.3* Placement of Wheelchair Locations
EXCEPTION: Accessible viewing positions may be clustered for bleachers, balconies, and other areas having sight lines that require slopes of greater than 5 percent....
-
505.6 Gripping Surface
Where handrails are provided along walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along their entire length...
-
The SmartWheel
Although providing very accurate data and the ability to extrapolate to longer intervals, there still needs to be a standard for slope, flatness, and smoothness at longer intervals....
-
11B-705.1.2.2.2.1 One entrance/exit point
Where the turning space has one entrance/exit point other than the sloped ramp segments, detectable warnings shall be 36 inches (914 mm) deep, as measured perpendicular to the curb, and...
-
1. Public Right-of-Way
In addition, Kirola's experts measured curb ramp slopes without considering the ramp's overall "rise in run" and flatness. RT 2056:10-2057:1....
-
11B-201.4 Construction Support Facilities
While an accessible route is required between construction support facilities and the toilet and parking facilities serving them, an accessible route is not required between site arrival...
-
11B-201.4 Construction Support Facilities
While an accessible route is required between construction support facilities and the toilet and parking facilities serving them, an accessible route is not required between site arrival...
-
General [4.5.1]
Many variables affect the performance of a given walking surface, including slope and cross slope, its material, jointing, texture, and finish, the presence of moisture or contaminants,...
-
Exemptions for Entire Trail or Beach Access Route
The proposed rule would have exempted an entire trail from complying with the technical requirements for trails when: The combination of running slope and cross slope exceeds 40...
-
Installation of Aggregate Surfaces at Bradford Woods
Woods conformed to the following protocol: Prior to installing the crushed rock (aggregate) surfacing material, the trail bed shall be shaped to reflect the same linear grade and cross slope...
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
Test No. 1 -- Individual Building Test may only be used if the site has terrain over 15 percent slope. Test No. 3 -- Unusual Characteristics Test may be used if applicable....
-
Using the Conditions for an Exception in FSORAG
The terrain makes it impossible to meet the technical requirement for running slope without severe cuts or fills....
-
11B-106.5 Defined terms
USE CIRCULATION PATH CLEAR CLEAR FLOOR SPACE CLOSED-CIRCUIT TELEPHONE COMMERCIAL FACILITIES COMMERCIAL PLACE OF PUBLIC AMUSEMENT COMMON USE COMPLY WITH CROSS SLOPE...