The maximum permitted height for operable parts is consistent with 308 of this document. The standard also addresses attendant operation....
Search Results "Coin Slot Height"
Filters
Commonly Searched Documents
-
[2010 ADAS] 105.2.2 ASME
-
Railings—Guardrails, Handrails, and Safety
For safety, the International Building Code (IBC), http://www.iccsafe.org, section 1003.2.12 contains requirements for guardrail height and the spacing of rails where there is a drop off...
-
4.1 Introduction
The idea that a control or operable hardware located on a plane in front of the user can be accessible with a forward reach, regardless of the height, is not substantiated by this research...
-
[2010 ADAS] 105.2.2 ASME
The maximum permitted height for operable parts is consistent with 308 of this document. The standard also addresses attendant operation....
-
Pilot Rock WPTS Square Frame Picnic Table Using Formed Steel Channel
Nominal seat height is 18". The 8 ft. tables are ADA COMPLIANT....
-
Pilot Rock WPTS Square Frame Table Using Aluminum
Nominal seat height is 18". The 8 ft. tables are ADA COMPLIANT....
-
GE® 30" Drop-In Electric Range JDS28DFWW
30 in Net Weight 116 lb Oven Interior Dimensions (W x H x D) (in.) 24 x 17-1/2 x 18-1/4 Overall Depth 28 1/2 in Overall Height...
-
Symmetry Vertical Platform Lift VPC-SL
Standard Features: 750 lb capacity Speed: 10 FPM with a 1HP, 115V motor Lifting height: up to 168” Steel constructed with electrostatic, powder-coated finish...
-
AJW Architectural Products UG2-Railing UG2X-Y108 108" Concealed Snap Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG3-A Series UG3-A12 12" Concealed Snap Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG130-A Series UG130-A12 12" Exposed Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG30-Railing UG30X-Y108 108" Concealed Set Screw Flange, 1.5" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Activar Hiawatha 535/509/536/537 Solid 1 inch Diameter Pulls
• Plate & Pull Combinations • Standard Pulls • Push & Pull Bar Sets • Custom & Unique Pulls • Full Height Pulls • Door Protection Plates & Edges • Auto...
-
AJW Architectural Products UG20-Railing UG20X-Y108 108" Concealed Set Screw Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Kawneer North America 190/350/500 Standard Entrances
Vertical stiles and top rail are 5" (127); bottom rail measures 6-1/2" (165.1) Results in superior strength for buildings experiencing heavy traffic conditions General Heights...
-
AquaTrek2 ADA Step System
MEETS OR EXCEEDS ADA REQUIREMENTS: No Open Risers 7” Maximum Riser Height 12” Minimum Tread Depth 24” Maximum Width Between Handrails Top Landing...
-
Hadrian Inc. Corridor Lockers
Quiet Operation The rigid double pan door design and honeycomb core (spanning the complete width and height of the door) make Hadrian lockers the quietest available....
-
Pilot Rock FSW-30 Campfire Ring
Model FSW-30 Series Campfire Ring features a 30” inside diameter and is available in two side heights of 16-7/8” and 23-3/8”....
-
Kawneer North America Flushline™ Entrances
6.4) or 1" (25.4) infills The aluminum provides a flush appearance while the gasket achieves an architectural look through radiused corners Hardware options allow customization Heights...
-
AJW Architectural Products UG2-A Series UG2-A12 12" Concealed Snap Flange, 1.25" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG120-A Series UG120-A12 12" Exposed Flange, 1.25" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
When is a Curb Ramp a Ramp?
The attributes that are unique to curb ramps make them suitable for their purpose primarily because of the limited rise (curb height) that they serve....
