The final rule exempts aisle stairs in assembly areas from the requirements for stairs....
Search Results "Elevator Exemption"
-
210 Stairways
-
F234.3 Minimum Number
These rides are not exempt from the other provisions in F234 requiring an accessible route to the load and unload areas and to the ride....
-
SAFE HARBOR
The 2010 regulations have incorporated an element-by-element “safe harbor” which exempts elements (which can be anything from a door knob to an entire room) that are currently in compliance...
-
Using the ORAR Exceptions [F202.3, Exception 4 and 1016, Exceptions 1, 2, and 3]
When an ORAR is provided within the roadway, it is exempted from the technical requirements for cross slope, running grade, resting intervals, and passing spaces....
-
234.3 Minimum Number
These rides are not exempt from the other provisions in 234 requiring an accessible route to the load and unload areas and to the ride....
-
8.1 Q. The Fair Housing Act applies to covered multifamily dwellings built for first occupancy after March 13, 1991. What is acceptable evidence of first occupancy?
The Fair Housing Act regulations provide that covered multifamily dwellings shall be deemed to be designed and constructed for first occupancy on or before March 13, 1991 (and therefore exempt...
-
Alterations
The 2010 Standards also contain an exemption for certain alterations that would threaten or destroy the historic significance of an historic property....
-
234.3 Minimum Number
These rides are not exempt from the other provisions in 234 requiring an accessible route to the load and unload areas and to the ride....
-
1136A.1 Receptacle heights
Receptacle outlets installed as part of permanently installed baseboard heaters are exempt. 2....
-
11B-805.4 Examination, diagnostic and treatment rooms
Note that all patient toilet rooms, other than those specifically exempted (i.e. non-accessible patient rooms and ICU patient rooms), must comply with Section 11B-603....
-
11B-805.4 Examination, diagnostic and treatment rooms
Note that all patient toilet rooms, other than those specifically exempted (i.e. non-accessible patient rooms and ICU patient rooms), must comply with Section 11B-603....
-
11B-203 General exceptions
Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by 11B-203. 11B-203.9 Employee work areas....
- Texas Board of Professional Engineers
- PEMKO 2" to 48" Aluminum Plates No. 14/1
-
Bobrick ClassicSeries Recessed Convertible Automatic, Universal Roll Towel Dispenser/Waste Receptacle B-3974 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Ground Level Play Components: ADA Standard Section 240.2.1
Section 240.2.1 covers scoping requirements in the current ADA Standards for ground level play components.
-
11B-240.2.1 Ground level play components
Where ramps connect elevated play components, the maximum rise of any ramp run is limited to 12 inches (305 mm)....
-
11B-240.2.1 Ground level play components
Where ramps connect elevated play components, the maximum rise of any ramp run is limited to 12 inches (305 mm)....
-
4.3.8 Changes in Levels
If an accessible route has changes in level greater than 1/2 in (13 mm), then a curb ramp, ramp, elevator, or platform lift (as permitted in 4.1.3 and 4.1.6) shall be provided that complies...
-
6.9 Tread Obstacles
Where the surface is paved or is elevated above the natural ground, obstacles shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
Press Boxes [§206.2.7]
press boxes except where the aggregate area of all press boxes serving a playing field or assembly area is no more than 500 sq. ft. if press boxes are either: free-standing and elevated...
- AccessRec De-Bug All Terrain Wheelchair
-
Two-Way Communication
Section 407.4.9 provides criteria for emergency two-way communication systems in elevator cars which address the height of operable parts and identification by tactile characters....
-
1.1.1 Measurement tools
Angular or slope measuring devices should be capable of measuring to a precision of 0.1 degree and elevation measuring devices should be capable of measuring to a precision of 0.01 ft (1...