18" (455mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
Search Results "Transfer Seat (Transportation)"
- Bobrick 18" Straight Grab Bar B-5806 x 18
- Bobrick 18" Straight Grab Bar Peened B-5806.99 x 18
- Bobrick 18" Straight Grab Bar B-6806 x 18
- Delta 1-1/2″ x 18″ ADA Grab Bar, Concealed Mounting 40118-PS
-
Seating Accommodations
seats....
-
M301.3 Supports
Transfer supports, stirrups, and reclining surfaces shall comply with M301.3....
-
M301.3 Supports
Transfer supports, leg supports, and reclining surfaces shall comply with M301.3....
-
§27.71(k)(5) Output.
(5) Output. Automated airport kiosks must comply with paragraphs (k)(5)(i) through (iv) of this section.
-
§ 27.71(k)(5) Output
(5) Output. Automated airport kiosks must comply with paragraphs (k)(5)(i) through (iv) of this section.
- New Horizons: Information for the Air Traveler with a Disability
-
Plan 4B: 13-Foot Wide Accessible Guest Room
Features include an alternate roll-in shower with a seat, comparable vanity, wardrobe, and door connecting to adjacent guest room. Furnishings include two beds. ...
-
Plan 3B: 12-Foot Wide Accessible Guest Room
Features include a standard roll-in shower with a seat, comparable vanity, wardrobe, and door connecting to adjacent guest room. Furnishings include two beds. ...
-
Table 2: Summary of Department of Transportation Survey
Architectural Research Consulting 20-07 (167) No. Element surveyed Minimum reported tolerance Maximum reported tolerance Average reported...
-
Section 35.150(b)(4) and (5) Existing Play Areas and Recreation Facilities (Section-by-Section Analysis)
[See subsections ...]
-
Section 36.302(f) Ticketing (Section-by-Section Analysis)
sellers, and distributors were violating title III's nondiscrimination mandate by not providing individuals with disabilities the same opportunities to purchase tickets for accessible seating...
-
Aquatic Recreation Facilities
The accessible means of entry can be either a pool lift, sloped entry, or transfer system....
- Figure 607.2 Clearance for Bathtubs – Drawing from the U.S. Access Board
- Figure 608.3.3 Grab Bars for Alternate Roll-In Type Showers – Drawing from the U.S. Access Board
-
Figure M4: Overview of M303 Diagnostic Equipment for Use by a Patient While Seated in a Wheelchair and M304 Diagnostic Equipment for Use by a Patient in a Standing Position (Weight Scale Example)
The weight scale is usable by both people who are seated in wheelchairs and those who stand and must meet the requirements of both Sections M303 and M304. (M101.2)...
-
226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with 902....
-
M303.2.4.1 Breast Platforms
Wheelchair spaces beneath breast platforms shall comply with M303.2.4.1.
-
M303.2.4.1.1 Depth
Wheelchair spaces shall include knee and toe clearance 25 inches (635 mm) deep minimum and 28 inches (710 mm) deep maximum.
-
M303.2.4.1.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum from the toe end of the wheelchair...
-
5.8.2 Knee and Toe Clearance Under Breast Platform
5.8.2 Knee and Toe Clearance Under Breast Platform. The overall knee and toe space should be increased to a minimum of 28 inches deep, from the initially proposed 25 inch absolute...