The force required to activate operable parts shall be 5 lbf (22.2 N) maximum....
Search Results "Maximum Reach Depth"
Filters
Commonly Searched Documents
-
T304.4 Operation
-
11B-309 Operable parts
SECTION TITLE NOTES 11B-309 Operable parts Adds to existing exception for 5 lb. maximum operating...
-
1009.6.2 Handrails
The width between handrails shall be 20 inches (510 mm) minimum and 24 inches (610 mm) maximum. Handrail extensions required by 505.10.3 shall not be required on pool stairs....
-
1009.4.2 Height
The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck. Figure 1009.4.2 Transfer Wall Height...
-
11B-1009.6.2 Handrails
The width between handrails shall be 20 inches (508 mm) minimum and 24 inches (610 mm) maximum....
-
903.3 Size
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
11B-704.2.1.1 Parallel approach
Where a parallel approach is provided, the distance from the edge of the telephone enclosure to the face of the telephone unit shall be 10 inches (254 mm) maximum....
-
4.26.3(1)
(1) Bending stress in a grab bar or seat induced by the maximum bending moment from the application of 250 lbf (1112N) shall be less than the allowable stress for the material of the grab...
-
A4.3.1(2) Sites
Level, indirect routes or those with running slopes lower than 1:20 can sometimes provide more convenience than direct routes with maximum allowable slopes or with ramps....
-
A4.3.1(2) Sites
Level, indirect routes or those with running slopes lower than 1:20 can sometimes provide more convenience than direct routes with maximum allowable slopes or with ramps....
-
M101.1 Purpose
The standards provide for independent access to and use of diagnostic equipment by patients with disabilities to the maximum extent possible....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-1009.6.2 Handrails
The width between handrails shall be 20 inches (508 mm) minimum and 24 inches (610 mm) maximum....
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
11B-1009.6.2 Handrails
The width between handrails shall be 20 inches (508 mm) minimum and 24 inches (610 mm) maximum....
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
Guldmann GH1 F Lifting Module
installed the GH1 F gives you exactly the same functions as the GH1 lifting module - and delivers the same benefits as a fixed ceiling lift: Lifting height is not limited to the reach...
-
Ultratec Supercom 4400 TTY
Its user-programmable relay voice announcer tells people they have reached a TTY and asks them to use a TTY or dial relay....
-
Lynx Grills Inc. 30” Grill 1 ProSear Burner & 1 Stainless Steel Burner with Rotisserie (L500ADAR)
Available in 30" and 36" freestanding cart sizes. 32" high cooking surface 8" toekick Adjustable side handle for less than a 42" reach Accessible side or rear mounted propane...
-
Lynx Grills Inc. 36” Grill 1 ProSear Burner & 2 Stainless Steel Burners with Rotisserie (L600ADAR)
Available in 30" and 36" freestanding cart sizes. 32" high cooking surface 8" toekick Adjustable side handle for less than a 42" reach Accessible side or rear mounted propane...
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
The Committee recommends exam chairs with a fixed footrest have a transfer surface minimum of a 17 inch depth and a 21 inch width located on both sides of the chair to allow for a left or...
-
604.9.3 Height
The height of water closets shall be 11 inches (280 mm) minimum and 17 inches (430 mm) maximum measured to the top of the seat....
-
§ 1194.23(k)(2)
The force required to activate controls and keys shall be 5 lbs. (22.2 N) maximum....
-
5.4.3 Transfer Support Height for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
Transfer supports should be positioned 6 inches minimum and 19 inches maximum above the transfer surface....
