Persons with disabilities considered the 34 inch maximum height too high for surfaces used for any length of time....
Search Results "Ground Surface"
-
Table Surface Height
-
Tactile Surface
The proposed rule included provisions that generally recognized alternative tactile surfaces equally detectable underfoot or other designs or technologies that provide equal or superior...
-
§382.51(a)
(a) As a carrier, you must comply with the following requirements with respect to all terminal facilities you own, lease, or control at a U.S. airport:
-
§382.51(b)
(b) As a carrier, you must ensure that passengers with a disability can readily use all terminal facilities you own, lease, or control at a foreign airport. In the case of foreign...
-
John Brabyn, Ph.D., Director of Rehabilitation Engineering Research, Center on Low Vision and Blindness (NIDRR), Smith-Kettlewell Eye Research Institute
Handrails should contrast visually with background surfaces. Floor finishings should contrast with walls or a contrasting skirting should be provided....
-
11B-707.2 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided....
-
11B-707.2 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided....
-
Why are surface characteristics specified?
Why are surface characteristics specified? Over twenty-seven million Americans report some difficulty in walking....
-
703.5.6 Height from Finish Floor or Ground
703.5.6 Height from Finish Floor or Ground. Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....
-
805.3 Clear Floor or Ground Space
805.3 Clear Floor or Ground Space. A clear floor space complying with 305 shall be provided on each side of the bed....
- Access Board: Tactile Sign Scoping
- IDeA Center: Transferring from Wheeled Mobility to MidMark's Barrier-Free Examining Table
- Norton Surface Mounted 5600 Hands-Free Door Operation Kits
-
704.7 Unexposed surface temperature
Where protected openings are not limited by Section 704.8, the limitation on the rise of temperature on the unexposed surface of exterior walls the exterior wall in any story, the total...
-
5.3.2 Transfer Sides for Equipment Used by Patients in a Supine, Prone, or Side-Lying Position
5.3.2 Transfer Sides for Equipment Used by Patients in a Supine, Prone, or Side-Lying Position.
-
Bathroom Accommodating Reduced Ambulatory Mobility
Ceiling lift between the bathtub and toilet (this is actually fun to use) – reinforcement less than $50 Chromatherapy bathtub for relaxation FSC certified maple...
-
M301.3.1 Transfer Supports
Transfer supports shall be provided for use with the transfer sides required by M301.2.3 and shall comply with M305.2.
-
1133A.1 General
Kitchens shall be on an accessible route and shall comply with this section. (See Figure 11A-10A.)
-
11B-1008.2.4.1 Ground level
At ground level, the clear width of accessible routes shall be 60 inches (1524 mm) minimum. Exceptions: 1. ...
-
11B-1008.2.4.1 Ground level
At ground level, the clear width of accessible routes shall be 60 inches (1524 mm) minimum. Exceptions: 1....
-
11B-1008.2.4.1 Ground level
At ground level, the clear width of accessible routes shall be 60 inches (1524 mm) minimum....
-
R208 Detectable Warning Surfaces
R208 Detectable Warning Surfaces...
-
R305 Detectable Warning Surfaces
R305 Detectable Warning Surfaces...
-
Cross Section of Gripping Surfaces
The Access Board is considering whether the above cross section dimensions would be appropriate for the gripping surfaces of transfer supports on diagnostic equipment used by patients in...