(III) The amount of time spent on the job performing the function;...
Search Results "Elevator Signal Timing"
Commonly Searched Documents
-
1630.2(n)(3)(III)
-
§1630.2(n)(3)(iii)
(iii) The amount of time spent on the job performing the function;...
-
California Department of Managed Health Care - Physical Access to Health Care Fact Sheet
If You Use a Wheelchair or Have a Hard Time Walking...
-
§ 37.151(a)
(a) At the time of submission of the initial plan on January 26, 1992—...
-
11B-802.3.1 Alignment
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
802.3.1 Alignment
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
802.3.1 Alignment
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
Direct Connections
Direct Connections At least one entrance that serves enclosed parking garages, pedestrian tunnels, or elevated walkways must be accessible where such connections are provided....
-
4.3.8 CHANGES IN LEVELS
If an accessible route has changes in level greater than 1/2 in (13 mm), then a curb ramp, ramp, elevator, or platform lift shall be provided that complies with 4.7, 4.8, 4.10, or 4.11,...
-
4.5.3 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
11B-802.3.1 Alignment
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
11B-802.3.1 Alignment
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
PHYSICAL PROVISIONS
Route ADAAG section 4.5 Ground and Floor Surfaces Usable with reduced ability to respond quickly to product requests Provide at least one mode that does not require a timed...
-
11B-703.2.7 Character spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
§382.83(a)(2)(iii)
(iii) You must assign a seat meeting the requirements of this section to a passenger with a disability listed in §382.81 of this part who requests the accommodation at the time the passenger...
-
Resort Condominium
A resort condominium is any unit or group of units in a condominium, cooperative, or time-share plan which is rented more than three times a calendar year for periods of less than 30 days...
-
§ 36.105(d)(3)(i)
(i) At all times taking into account the principles set forth in the rules of construction, in determining whether an individual is substantially limited in a major life activity, it may...
-
§ 35.108(d)(3)(i)
(i) At all times taking into account the principles set forth in the rules of construction, in determining whether an individual is substantially limited in a major life activity, it may...
-
2. Updates to Functional Performance Criteria: 508 Standards and 255 Guidelines
the time limit with a simple action (for example, “press the space bar”), and the user is allowed to extend the time limit at least ten times; or •Real-time Exception: The time limit...
-
3.4.5 Grade
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
6. Longitudinal Profile Measurement
6.1 The longitudinal profile measurements can be obtained from equipment that operate in a range of speeds from static to meters per second. 6.2 The elevation profile measuring equipment...
-
WORK AREA EQUIPMENT
Work area equipment does not include passenger elevators and other accessible means of vertical transportation....
-
WORK AREA EQUIPMENT
Work area equipment does not include passenger elevators and other accessible means of vertical transportation....
-
§ 37.153(b)
(b) Any waiver granted will be for a limited and specified period of time....