Amusement attractions shall not be required to comply with 240. 4....
Search Results "Amusement Ride Seat"
-
240.1 General
-
a) History and Objectives
Access Board's Recreation Access Advisory Committee and Places of Amusement Committee. RT 1771:21-1773:22, 1775:9-11....
-
240.1 General
Amusement attractions shall not be required to comply with 240. 4....
- Pilot Rock WUT and WUTH Picnic Table Using Formed Steel Channel
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
T214.1 General
Where provided for passenger use, operable parts at wheelchair spaces and priority seats, stop request systems, and fare collection devices serving passenger access routes shall comply with...
-
10. Shower Wand
Is there an adjustable height shower wand with at least a 60" long hose provided for persons who must shower from a seated position?...
-
2d
Is there an adjustable height shower wand with at least a 60" long hose provided for persons who must shower from a seated position?...
-
1j
Is there an adjustable height shower wand with at least a 60" long hose provided for persons who must shower from a seated position?...
-
8. Shower Curbs
Are the roll-in showers free of curbs or lips at the shower floor that would impede wheelchair approach and transfer onto the folding shower seat?...
-
11B-607.4.2.3 Head end wall
FIGURE 11B-607.4.2 GRAB BARS FOR BATHTUBS WITH REMOVABLE IN-TUB SEATS...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
§ 37.91(a)(2)
(2) To fold and store wheelchairs (to accommodate individuals who wish to transfer to coach seats) equal to not less than one half the number of single level rail passenger coaches in the...
- Landscape Forms Inc. Lakeside Bench Collection
- Landscape Forms Inc. 35 Stay Bench
- SciFit Inclusive Fitness PRO2 - Total Body Machine
-
1009.3.3 Area of Refuge
Areas of refuge are not required for smoke-protected or open-air assembly seating areas complying with Sections 1029.6.2 and 1029.6.3....
-
1009.4.2 Area of refuge
Areas of refuge are not required at elevators serving smoke-protected or open-air assembly seating areas complying with Sections 1030.6.2 and 1030.6.3....
-
11B-607.4.1.2 Control end wall
FIGURE 11B-607.4.1 GRAB BARS FOR BATHTUBS WITH PERMANENT SEATS...
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
§382.141(a)
(a) As a carrier that operates aircraft with 19 or more passenger seats, you must provide training, meeting the requirements of this paragraph, for all personnel who deal with the traveling...