All dimensions are subject to conventional engineering tolerances for material properties and field conditions, including normal anticipated wear not exceeding accepted industry-wide standards...
Search Results "1991 Standards"
Commonly Searched Documents
-
§ 38.4(b) Dimensional tolerances
-
11B-812.8.3 Twenty-six or more
Where twenty-six or more total EVCS are provided, all required van accessible and all required standard accessible EVCS shall be identified by an ISA complying with Section 11B-703.7.2.1...
-
11B-812.8.3 Twenty-six or more
Where twenty-six or more total EVCS are provided, all required van accessible and all required standard accessible EVCS shall be identified by an ISA complying with Section 11B-703.7.2.1...
-
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats [2010 ADA Standards] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats ...
-
4. Coverage of Real-Time Text
As noted previously, the existing 508 Standards and 255 Guidelines were promulgated nearly fifteen years ago....
-
Guidelines for Requirement 2
The Department has retained the applicable provisions of the ANSI Standard for parking space....
-
Baseline
The local transportation department design manuals and standard drawings are generally consistent with their state transportation department design manuals and standard drawings....
-
1. New Curb Ramp Construction and Alterations
In 1994, the City revised its curb ramp design standards to provide more detailed specifications. RT 2467:21-2471:20....
-
Issue 22: How is accessibility for persons with low vision assessed during the design review process?
[If they] don’t know the difference, you tell them you have a standard. The standard is implementing this law and the law was passed by Congress....
-
Paragraph (e) Availability of auditory information for people who are hard of hearing (Section-by-Section Analysis)
This is a 20 dB gain over the standard 85 dB. The sound was clear with no distortion....
-
T704 Announcement Systems
No commenters suggested or cited any referenceable standards for audio quality....
-
SUMMARY OF PRELIMINARY REGULATORY ANALYSIS
The focus of the Preliminary RIA is to define and, where possible, quantify and monetize the potential economic benefits and costs of the proposed 508 Standards and 255 Guidelines....
-
ASME
for Platform Lifts and Stairway Chairlifts 1109.8, Table 3001.3 [2010 ADA Standards] 105.2.2 ASME....
- SLOPE Waste Receptacles
- Proline Drain: QuickDrainUSA - Tub to Shower Conversion
-
Section 36.103 Relationship to Other Laws (Preamble, Section-by-Section Analysis)
Paragraph (a) provides that, except as otherwise specifically provided by this part, the ADA is not intended to apply lesser standards than are required under title V of the Rehabilitation...
-
Accessible Route
The exceptions contained in section 1003.2 of the 2010 Standards modify the requirements of Chapter 4....
-
Site Selection
Sites constructed after the ADA was passed should generally meet the ADA’s facility standards....
-
Title III Readily Achievable Barrier Removal
an existing pool, removing barriers may involve installation of a fixed pool lift with independent operation by the user or other accessible means of entry that complies with the 2010 Standards...
-
Accessible Teeing Grounds, Putting Greens, and Weather Shelters
Sections 238.2 and 1006.4 of the 2010 Standards require that golf cars be able to enter and exit each putting green and weather shelter....
-
Accessible Route to Play Components
Section 206.2.17 of the 2010 Standards provides scoping requirements for accessible routes to ground level and elevated play components and to soft contained play structures....
-
Minimum Clear Opening
Representatives Edwards, Frank, and Fish expressed their support for the Option One specification on minimum clearance which is consistent with the ANSI Standard....
-
3.3.2 Unoccupied Device Length
The unoccupied lengths of devices used for the “reference wheelchair” described in the U.S. standard equals the average value obtained from our overall sample....
-
5. Costs of the Proposed Rule
The Preliminary RIA shows that the proposed standards and guidelines will likely increase compliance costs substantially when first implemented, but will thereafter result in only a small...