Installation: Before installing grab bars, verify with all state and local codes for requirements on bar diameter and type finish....
Search Results "Swing Grab Bar"
-
AJW Architectural Products UG130-A Series UG130-A12 12" Exposed Flange, 1.5" Diameter Grab Bar - Configuration A
-
AJW Architectural Products UG120-A Series UG120-A12 12" Exposed Flange, 1.25" Diameter Grab Bar - Configuration A
Installation: Before installing grab bars, verify with all state and local codes for requirements on bar diameter and type finish....
-
(1)(c)
(c) A grab bar at least 24 inches (610 mm) long should be mounted behind the water closet, and a horizontal grab bar at least 40 inches (1015 mm) long should be mounted on at least one side...
-
Comfort Designs Tamper Proof Anti-ligature Grab Bars
Tamper proof anti-ligature grab bars are designed to prevent tying of materials by eliminating space between wall and bar. Weep holes allow for water drainage....
-
Moen Stainless 30" Grab Bar
complies with Americans with Disabilities Act (ADA) specifications 30" bar length 1.25" bar diameter corrosion resistant stainless steel construction for added durability limited...
-
11B-609.6 Fittings
Grab bars shall not rotate within their fittings....
-
609.6 Fittings
Grab bars shall not rotate within their fittings....
-
609.6 Fittings
Grab bars shall not rotate within their fittings....
-
609.6 Fittings
Grab bars shall not rotate within their fittings....
-
11B-609.6 Fittings
Grab bars shall not rotate within their fittings....
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.3.3
Section 608.3.3 covers the current ADA Standards for grab bars in alternate roll-in type shower compartments.
-
11B-604.8.2.3 Grab bars
Grab bars shall comply with Section 11B-609. A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
Inpro Corporation Endurant® Stainless Steel Straight Grab Bar
Grab bars offer a secure and safe experience. Many styles of ADA-compliant grab bars, safety supports, bath seats and coordinating accessories are available....
-
609.6 Fittings
Grab bars shall not rotate within their fittings....
-
Meeting User Needs
As a result, grab bars on both sides of a toilet that would support a standing transfer were provided rather than alongside and behind the toilet as would be used for a sliding transfer....
-
11B-609.6 Fittings
Grab bars shall not rotate within their fittings....
-
AJW Architectural Products UG3-A Series UG3-A12 12" Concealed Snap Flange, 1.5" Diameter Grab Bar - Configuration A
Bars with greater offsets will support loads up to 250lbs when properly installed....
-
AJW Architectural Products UG2-A Series UG2-A12 12" Concealed Snap Flange, 1.25" Diameter Grab Bar - Configuration A
Bars with greater offsets will support loads up to 250lbs when properly installed....
-
11B-604.8.2.3 Grab bars
Grab bars shall comply with Section 11B-609. A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
Bradley Security Grab Bars SA70 Series
Intermediate supports are contour cut and joined by welding to form an integral part of the grab bar. All welds ground and polished to blend....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Flanges are heliarc welded to bar to form a one piece construction....
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Flanges are heliarc welded to bar to form a one piece construction....
