transfer supports must comply with the technical requirements in M305.2 of the proposed rule....
Search Results "Horizontal Standing Support"
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
-
M302.3 Supports (Section-by-Section Analysis)
An editorial change was made to this section as a result of the change in M302.3.2, described below, to replace the word “stirrups” with the term “leg supports.”...
-
Lines of Sight for Wheelchair Spaces
Spaces must be dispersed horizontally and vertically. Horizontal dispersion pertains to the lateral, or side to side, location of spaces relative to the ends of rows....
-
M301.3 Supports
Transfer supports, leg supports, and reclining surfaces shall comply with M301.3....
-
4.4.3 Backrest and Armrest
strength of backs, armrests, and mounting devices shall comply with section 903.6 of the ABAAS, which states: “Allowable stresses shall not be exceeded for materials used when a vertical or horizontal...
-
§ 38.125(b)(12) Use by standees
The lift may be marked to indicate a preferred standing position....
-
§ 38.159(b)(12) Use by standees
The platform may be marked to indicate a preferred standing position....
-
Transfer Supports Location and Configuration M301.3 and M302.3
Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the transfer...
-
ii. Accessible scales
Wheelchair scales are currently available as stand-alone devices or as equipment that is integrated into other medical equipment....
-
5.2 Counters and Bars
Where food or drink is served at counters exceeding 34 in (865 mm) in height for consumption by customers seated on stools or standing at the counter, a portion of the main counter which...
-
M301.3 Supports
Transfer supports, stirrups, and reclining surfaces shall comply with M301.3....
-
Transfer Supports (M301.3.1, M302.3.1, and M305.2)
M305.2.2 would require the transfer supports and their connections to be capable of resisting vertical and horizontal forces of 250 pounds applied to all points of the transfer support....
-
1007.2.1 Buildings with four or more stories
buildings equipped throughout with an automatic sprinkler system installed in accordance with Section 903.3.1.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal...
-
1003.2.13.1.1 Buildings with four or more stories
buildings equipped throughout with an automatic sprinkler system installed in accordance with Section 903.3.1.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal...
-
M302.3.2 Leg Supports (Section-by-Section Analysis)
The MDE NPRM did not propose to require stirrups to provide a method of supporting, positioning, and securing the patient’s legs for diagnostic equipment used by patients in the seated position...
-
1009.4 Elevators
Areas of refuge are not required for elevators accessed from a refuge area in conjunction with a horizontal exit....
-
Q4. If someone's dog calms them when having an anxiety attack, does this qualify it as a service animal?
The ADA makes a distinction between psychiatric service animals and emotional support animals....
-
505.6 Gripping Surface
Where provided, horizontal projections shall occur 1½ inches (38 mm) minimum below the bottom of the handrail gripping surface. [ECTCR UFAS 4.8.5(4), 4.9.4(4)] EXCEPTIONS: 1....
-
505.6 Gripping Surface
Where provided, horizontal projections shall occur 1½ inches (38 mm) minimum below the bottom of the handrail gripping surface. EXCEPTIONS: 1....
-
11B-505.6 Gripping surface
Where provided, horizontal projections shall occur 1½ inches (38 mm) minimum below the bottom of the handrail gripping surface. Exceptions: 1. ...
-
505.6 Gripping Surface
Where provided, horizontal projections shall occur 1 1/2 inches (38 mm) minimum below the bottom of the handrail gripping surface. EXCEPTIONS: 1....
-
M305.5 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....
-
M301.3.3 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....
-
§ 35.151(g)(2)
(2) Assembly areas that are required to horizontally disperse wheelchair spaces and companion seats by section 221.2.3.1 of the 2010 Standards and have seating encircling, in whole or in...