The site impracticality tests in this section may be used to determine the number of required residential dwelling units with adaptable features in buildings without an elevator,...
Search Results "Entry Door (FHA)"
-
11B-233.3.1.2.6 Public housing facility site impracticality
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
Stanley QME 100 Series Grade 1 Heavy Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
Stanley QMS 100 Series Grade 1 Heavy-Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
TownSteel MS Series, Grade 1 With "W" Escutcheon Mortise Locks
It's specially designed to cover extra holes of exiting door prep....
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
Doors shall have a clear opening at least 32 inches wide when measured from the face of the door to the opposite stop when the door is opened 90 degrees and shall have hardware usable with...
-
M303.2.3.1 Front or Rear Entry
Where wheelchair space entry and exit is provided at only one end (front or rear) the wheelchair space shall be 48 inches (1220 mm) deep minimum....
-
TownSteel CSRC Series, Grade 2, Clutched, Conical Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
TownSteel CB Series, Grade 2 Non-Clutched Flat Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
M303.2.3.2 Pass Through Entry
Where wheelchair space entry and exit permits pass through from one end to the other, the wheelchair space shall be 40 inches deep (1015 mm) minimum....
-
Activar Hiawatha 5-1/2P Series Pull with Matching Push Plate
Cast Pull Combined with Coordinating Push Plate Gives Your Door A Finished Look and a Durable Finish. The most popular Hiawatha pull plate combinations are shown here....
-
Figure 404.2.4.1(a) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Pull Side – Drawing from the U.S. Access Board
-
Yale Affinity® Smart Card Locks
Powerful audit capabilities: With a time-stamped audit trail, management can quickly and easily identify which cards have been used to access at the door....
-
Allegion Schlage LT Series Mechanical Locks with Tubular Interconnect
Safety and security are paramount when choosing door hardware, but continuity in design is also key for those projects that require enhanced aesthetic appeal....
-
Stanley QCL 200 Series Grade 2 Standard Duty Cylindrical Locks
Certifications ANSI/BHMA A156.2 Series Grade 2 ANSI A117.1 Accessibility Code (ADA Compliant) UL/cUL listed(3-hours) for "A" label single door applications (4' x 8...
-
DORMA C800 Series Lockset
Easy installation DORMA C800 Series locksets are easy to install in both wood and hollow metal doors with ANSI/BHMA Standard A156.115 preparations for cylindrical locks....
-
Stanley QCI 200 Series Grade 2 Standard-Duty Interconnected Locks
two (2) ball bearings inserted to prevent drill attacks ADA thumbturn Certifications ANSI/BHMA A156.12 - 1999 Grade 2 UL/cUL listed (3-hours) for "A" label single door...
-
Figure 404.2.4.1(b) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Push Side – Drawing from the U.S. Access Board
-
Stanley QCL 100 Series Grade 1 Heavy Duty Cylindrical Locks
Certifications ANSI/BHMA A156.2 Series Grade 1 ANSI A117.1 Accessibility Code (ADA Compliant) UL/cUL listed(3-hours) for “A” label single door applications (4' x 8...
-
Corbin Russwin Inc. ML20900 ECL Series Mortise Locksets
The self-contained integral continuous-duty actuator allows installation in standard mortise prep with slight modification by door manufacturer....
-
Yale 6400LN Series Grade 1 Cylindrical Locks
As a retrofit lock, installing the 6400LN is a cost-effective alternative to expensive door modification or replacement....
-
Yale 8800 Series Grade 1 Mortise Locks
When it comes to strength, the Yale® 8800 series brings a new measure of security to the door....
