Common use circulation paths located within employee work areas that are less than 1000 square feet (93 m2) and defined by permanently installed partitions, counters, casework, or furnishings...
Search Results "Counter Height"
Commonly Searched Documents
-
11B-206.2.8 Employee work areas
-
Specialized Customer Premises Equipment (Section-by-Section Analysis)
The Trace Center commented that TTYs are made primarily for individuals who are deaf and requiring that TTYs provide voice output for all of the information displayed on the screen seems counter...
-
III-7.3110 Work areas
Does the work area exemption apply only to areas that can be characterized as individual work stations, such as cubicles, counters, offices, or booths?...
- BTX Intelligent Fashion Motorized Drapery Systems
- Big John Commode Chair BJBC
- Inclusion Solutions Voter Parking Sign
- Wikk Industries Ingress'r Automatic Door Control
-
IDEA Center
Distances between points or reference planes were used to derive estimated widths, heights, and depths of key device characteristics and body dimensions....
- Inclusion Solutions Alternate Entrance Double Sided Sign
- Hoyer Journey Stand-Up Lift
- Cybex Total Access Recumbent Bike
-
Stair widths
However, 1014.8 discusses projections and allows projections into the required width of stairs up to 4 1/2" at or below the handrail height....
-
Existing elevator cab size
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
- Kompan, Inc. Flexus GXY919
-
Standards that measure needed physical or mental ability to perform a job
Possible accommodations might include lowering the shelf-height, providing a step stool or other assistive device....
-
11B-703.3.1 Dimensions and capitalization
dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm) Dot height...
-
11B-404.2.10 Door and gate surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (254 mm) bottom smooth surface height...
-
404.2.10 Door and Gate Surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (255 mm) bottom smooth surface height...
-
5.4.2.2 Transfer and Positioning Support Length Recommendations for Imaging Equipment with Transfer Surfaces
A positioning support (for transfer surfaces >24” deep) is to extend horizontally along the side of the patient scanning/imaging bed/table with a length of 12 to 16 inches and a height...
-
Using the ORAR Exceptions [F202.3, Exception 4 and 1016, Exceptions 1, 2, and 3]
instance, where traffic calming devices, gates, or other barriers are provided on a paved roadway, the ORAR must have a clear width of 36 inches and obstacles cannot exceed one-half inch in height...
-
Seat Width Evaluation
seat was the smallest of the platform seat widths available in this study and was suitable for many participants (the 25th through 95th percentiles) for their level, highest and lowest height...
-
3.3 Equipment Barriers and Solutions
., a bright color against a dark background on the adjustment features, such as the weight amount or seat height and labels that are raised Some parts of the equipment stick...
-
The Purpose of FSORAG and FSTAG
included (scoping); what has to comply with the guidelines; definitions of terms; and technical requirements defining the physical characteristics of accessible features, such as width, height...
-
Car Controls [4.10.12]
Alignment for a side reach is often difficult at panels on the front of cars due to the limited maneuvering space; consider a maximum height of 48 inches for panels on the front of cars....