Designed by Chris Wright and Steve Tsai, Journal is a comprehensive wood casegoods system with a refined modern aesthetic designed to address this need....
Search Results "Universal Design"
-
Teknion Journal
-
Accessible Route to Parking
The Board has added a requirement that spaces and access aisles be designed so that parked vehicles "cannot obstruct the required clear width of adjacent accessible routes" (502.7)....
-
INTRODUCTION
These changes include revised accessibility standards, called the 2010 Standards for Accessible Design (2010 Standards), which establish minimum criteria for accessibility in design and...
-
Are self-evaluations and transition plans required to be updated?
Although there is no requirement to update them, updating is the best means to ensure compliance with current regulations and design standards. A lot has changed in 27 years....
-
A. Accessibility Laws
. §§ 12101, et seq. and all of its implementing regulations and design standards; the Rehabilitation Act of 1973, 29 U.S.C. §§ 790, et seq. and all of its implementing regulations and design...
-
13. New Construction and Alterations
Construction and Alterations The City shall ensure that all new construction and alteration work at Pedestrian Facilities fully complies with the 2010 ADA Standards for Accessible Design...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
407.7 Color (Section-by-Section Analysis)
The use of color is also addressed in existing 508 Standards § 1194.22(c), which requires that Web pages “be designed so that all information conveyed with color is also available without...
-
Grab Bars [4.16.4]
Alternative designs, such as movable grab bars, were considered when ADAAG was developed but information and consensus was lacking on their usefulness and performance....
-
F244.2.1 Alterations and Additions
Where an entity is implementing a transition plan for program accessibility developed pursuant to regulations issued under section 504 of the Rehabilitation Act that designates specific...
-
Shape and Diameter
Large sections, particularly those of rectangular design, are not as graspable as smaller circular sections. A gripping surface width between 1¼ to 1½ inches diameter is specified....
-
F245.2.3 Alterations and Additions
Where an entity is implementing a transition plan for program accessibility developed pursuant to regulations issued under section 504 of the Rehabilitation Act that designates specific...
-
205 Operable Parts
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(13) Controls...
-
223 Medical Care and Long-Term Care Facilities
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 6.1 General....
-
If a public accommodation determines that its facilities have barriers that should be removed, but it is not readily achievable to undertake all of the modifications now, what should it do?
The Department recommends that a public accommodation develop an implementation plan designed to achieve compliance with the ADA's barrier removal requirements....
-
Bathtub
As getting in and out of a tub is generally considered to be a falls risk for individuals, designers were not encouraged to promote independent bathing in eldercare facilities....
-
Required Compliance [§209]
Compliance is required only where areas are specifically designed or designated for passenger loading, such as those at airports, many hotels, and convention centers....
-
Side Entry: ADA Standard Section 1002.4.4.2
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-411.2.2.2 Verbal identification
When the accessibility function button is pressed, verbal announcement of the car designation shall be provided at the elevator car entrance upon arrival....
-
11B-411.2.2.2 Verbal identification
When the accessibility function button is pressed, verbal announcement of the car designation shall be provided at the elevator car entrance upon arrival....
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
1002.5.4 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
4.19.5 Faucets
Lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs....