The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....
Search Results "Parking Space Length"
Commonly Searched Documents
-
221.2.2 Integration
- Bobrick Accessibility Video -- Design for Turning Radiuses
-
Secondary market ticket sales. (Section-by-Section Analysis)
know: Question 20: If an individual resells a ticket for accessible seating to someone who does not need accessible seating, should the secondary purchaser be required to move if the space...
-
4.7.5 Openings
Openings in surface of the clear floor or ground spaces required by section 2.0 shall not allow passage of a sphere more than 1/2 inch (13 mm) in diameter....
-
11B-604 Water closets and toilet compartments
around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible routes, clear floor space...
-
1007.6.1 Size
Each area of refuge shall be sized to accommodate one wheelchair space of 30 inches by 48 inches (762 mm by 1219 mm) for each 200 occupants or portion thereof, based on the occupant load...
-
Clearances
Clearances Wheelchair spaces on amusement rides must comply with the following provisions, with three exceptions: Securement devices may overlap required clearances....
-
1003.2.13.5.1 Size
Each area of refuge shall be sized to accommodate one wheelchair space of 30 inches (762 mm) by 48 inches (1219 mm) for each 200 occupants or portion thereof, based on the occupant load...
-
405.7.3 Length
405.7.3 Length. The landing clear length shall be 60 inches (1525 mm) long minimum....
-
11B-812.6.4 Drive-up
Vehicle spaces serving drive-up EVCS shall be 204 inches (5182 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
5.3.2.2 Surface
The surface of the turning space and clear floor or ground space shall be firm and stable....
-
1003.3.1 Boat Slip Clearance
Boat slips shall provide clear pier space 60 inches (1525 mm) wide minimum and at least as long as the boat slips....
-
7(2)(b)(vi)
(vi) Bathtubs and tub/showers located in the bathroom provide a clear access aisle adjacent to the lavatory that is at least 2'6" wide and extends for a length of 4'0" (measured from the...
-
Sinks [4.24]
Where multiple sinks are provided in a space (e.g., laboratory classrooms), access to at least one or 5% in each such space is generally sufficient....
-
802.3 Companion Seats
Companion seats shall comply with 802.3.
-
Ticket transfer. (Section-by-Section Analysis)
Ticket transfer. The Department received many comments asking whether accessible seating has the same transfer rights as general seats. The proposed regulation at § 36.302(f)(5)...
-
11B-802.3 Companion seats
Companion seats shall comply with Section 11B-802.3.
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3.
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear...
-
F202.6 Leases
Buildings or facilities for which new leases are negotiated by the Federal government after the effective date of the revised standards issued pursuant to the Architectural Barriers...
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3.
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear...
-
802.3 Companion Seats
Companion seats shall comply with 802.3.
-
Whenever more than 300 seats are provided, wheelchair seating locations must be provided in more than one location.
• Whenever more than 300 seats are provided, wheelchair seating locations must be provided in more than one location. This is known as dispersed seating. Wheelchair seating locations...