Capacity, 42" Doors The Perfect Door Closer to Support CRL's Patch Hardware Narrow 3-1/16" (78 mm) Width Interchangeable Spindle Heights 5 Year Limited Warranty...
Search Results "Height Adjustable"
Filters
Commonly Searched Documents
-
CRL Jackson 900 Series Floor Mounted Door Closers
-
Allegion Falcon 1790 Series Exit Devices
The result is less maintenance and adjustment....
-
AccessRec All Terrain PVC Beach Chairs
beach chairs come with the following characteristics and features: Stainless steel hardware Single motion parking brakes 6ft (1.8mtr) 8 panel umbrella Adjustable...
-
American Standard Madera 1.6 gpf ADA Toilet with Exposed Manual Flush Valve System
and back spud, less seat High Effeciency, low consumption 1.6 GPF Conventional glazed Fully glazed 2-1/8” trapway 10" or 12" rough-in 16-1/2” rim height...
-
American Standard Madera 1.28 gpf ADA Toilet with Exposed Manual Flush Valve System
and back spud, less seat High Effeciency, low consumption 1.28 GPF Conventional glazed Fully glazed 2-1/8” trapway 10" or 12" rough-in 16-1/2” rim height...
-
Atlantis Railing
SPECIFICATIONS: Ramp Sections: The SunRailTM AccessEasy System is offered in a standard height of 42" with a handrail height of 36"....
-
Excel Dryer, Inc. ThinAir®Hand ADA Surface Mounted Hand Dryer TA-ABS
The ThinAir Hand Dryer features adjustable speed and sound control, variable heat settings and a washable pre-filter....
-
T704 Announcement Systems
Parts on stop request systems intended for passenger use must comply with the technical requirements for operable parts (T304), including height, location, and ease of use....
-
Appropriate Situational Applications of Technology
authored by museum staff or variety of vendor(s) to enable access at first public opening of exhibits regardless of deadlines IR emitter (or other wireless signals) with ability to adjust...
-
BTX Intelligent Fashion Motorized Drapery Systems
BTX prides itself on being able to offer the height of design, better heating and air conditioning energy conservation, and the convenient control that patrons have come to know and expect...
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
When the adjusted construction cost is less than or equal to the current valuation threshold, as defined in Chapter 2, Section 202, the cost of compliance with 11B-202.4 shall be limited...
-
Symmons SCOT® Slow-Closing Omni Temperature Lavatory Faucet S-60-H
Temperature limit stop to adjust outlet temperature. Time limit stop to adjust flow time. Spray outlet with 0.5 gpm flow rate. Vandal resistant....
-
Symmons Temptrol II (BP Series) Shower System BP-56-500-B30-V
and shower system features the legendary Symmons Temptrol® pressure-balancing mixing valve Constructed of solid brass, bronze and stainless steel Featuring a piston that adjusts...
-
1. Width and Depth of Wheelchair Spaces
Because the final rule also requires raised platforms over 1½ inches in height to provide edge protection that is a minimum of 2 inches high from the surface of the platform (See M303.2.6...
-
Meeting ANSI Standard S12.60 Requirements
For classrooms where there is no fixed lecture position for the teacher, such as those for lower grades, and where ceiling heights are less than ten feet, the best option is to place most...
-
1.3.1 Overview of NPRM
Equipment to Which Technical Criteria Applies Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position (M301) Transfer surface, including height...
-
Road Roughness Measurements
(Figure 8) An inertial profiler uses an accelerometer and a non-contacting sensor, such as a laser transducer, to measure height....
-
M303.2.4 Equipment Clearances (Section-by-Section Analysis)
Due to the reorganization of the equipment clearances provision in the final rule, the knee and toe clearance requirements for the other equipment section have been renamed depth and height...
-
H. Your Obligation to Provide Services and Equipment
[Sec. 382.21(a)(4)] On-board wheelchairs must be equipped with footrests, armrests which are movable or removable, adequate occupant restraint systems, a backrest height that permits assistance...
-
III 3.11000 Insurance
ILLUSTRATION: An amusement park requires individuals to meet a minimum height requirement that excludes some individuals with disabilities for certain rides because of a limitation in its...
-
1023.9 Stairway identification signs
comply with Chapter 11B shall be located at the landing of each floor level, placed adjacent to the door on the latch side, in all enclosed stairways in buildings two or more stories in height...
-
Standards that measure needed physical or mental ability to perform a job
Possible accommodations might include lowering the shelf-height, providing a step stool or other assistive device....
-
11B-703.3.1 Dimensions and capitalization
dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm) Dot height...
-
11B-404.2.10 Door and gate surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (254 mm) bottom smooth surface height...
