Section 216.12 covers scoping requirements in the current ADA Standards for signs at amusement rides.
Search Results "Folding Shower Seat"
-
Amusement Rides: ADA Standard Section 216.12
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
Flush Controls on Toilets
If plumbing valves are located directly behind the toilet seat, flush valves and related plumbing can cause injury or imbalance when a person leans back against them....
-
MEASUREMENT TECHNIQUE
is measured between the perineal cutout and the hinge point at the back of the seat....
-
907.5.2.3.1 Public use areas and common use areas
Multipurpose rooms Music practice rooms Occupational shops Occupied rooms where ambient noise impairs hearing of the fire alarm Sanitary facilities including restrooms, bathrooms and shower...
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
Accessible Plumbing Fixtures
The Board has added clarification that at least one water closet, lavatory, and bathtub or shower, where provided, must be accessible (807.2.4)....
-
§ 35.138(g) Ticket prices
The price of tickets for accessible seating shall not be set higher than for tickets to seating located in the same seating section for the same event. ...
- Bradley High Capacity Towel Dispenser / 11.6 Gallon Waste Receptacle 2037
-
II-5.2000 Methods for providing program accessibility.
ILLUSTRATION 4: A municipal performing arts center provides seating at two prices -- inexpensive balcony seats and more expensive orchestra seats....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
accessible route between stories, an accessible route shall not be required to a mezzanine dining area where the mezzanine contains less than 25 percent of the total combined area for seating...
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
accessible route between stories, an accessible route shall not be required to a mezzanine dining area where the mezzanine contains less than 25 percent of the total combined area for seating...
- Bradley High Capacity Towel Dispenser / 4.9 Gallon Waste Receptacle 2017
- Merlexi Craft™ Liberty MRI Wheelchairs
-
The carrier must designate priority stowage space for at least one wheelchair in the closet or other stowage area
If there is a closet or other approved stowage area for passengers’ carry-on items of sufficient size to accommodate a folding, collapsible, or break-down wheelchair, the carrier must...
-
Re: American Specialties 9014 Surface Mounted Horizontal Baby Changing Station
If seated in a wheelchair, the angle to graps the handl hold would not be possible. The strap was left dangling to use as an opener....
-
General: ADA Standard Section 405.1
Section 405.1 of the ADA Standards covers information in the current ADA Standards for ramps.
-
Size: ADA Standard Section 903.3
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
D. Comparable Facilities
Recipients must provide changing rooms, showers, and other facilities for students of one sex that are comparable to those provided to students of the other sex....
-
11. Toilet rooms and bathing facilities
Toilet rooms and bathing facilities (including water closets, toilet rooms and stalls, urinals, lavatories and mirrors, bathtubs, shower stalls, and sinks.) 4.22 Where provided in...
-
Structural Strength: ADA Standard Section 903.6
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...