that is difficult to grasp; aisles that are too narrow for a person using a wheelchair, electric scooter, or a walker; a high counter or narrow checkout aisles at a cash register, and fixed...
Search Results "Fixed Assembly Seating"
Filters
Commonly Searched Documents
-
Architectural Barriers
-
903.3.1.1.1 Exempt locations
Generator and transformer rooms separated from the remainder of the building by walls and floor/ceiling or roof/ceiling assemblies having a fire-resistance rating of not less than 2 hours...
-
12141(4) Operates
(4) Operates The term "operates", as used with respect to a fixed route system or demand responsive system, includes operation of such system by a person under a contractual or other...
-
2.4.1 Current Marketplace Dynamics
As is discussed below, the regulations implementing these federal laws do not currently include specific technical requirements for the accessibility of non-fixed medical equipment, although...
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
11B-411.2.1.3.4 Position
The face of hall call console assemblies and the face of touch screens shall be sloped away from the user at 7 to 25 degrees from the vertical plane....
-
Press Boxes [§206.2.7]
Press Boxes [§206.2.7] An accessible route is required to press boxes except where the aggregate area of all press boxes serving a playing field or assembly area is no more than 500 sq...
-
Vertical Clearance [§307.4]
Fixed barriers, such as guardrails, are required where the vertical clearance is less than 80” such as at open stairways and along sloped or curved walls....
-
II-5.2000 Methods for providing program accessibility.
ILLUSTRATION 4: A municipal performing arts center provides seating at two prices -- inexpensive balcony seats and more expensive orchestra seats....
-
306 Knee and Toe Clearance
Section 306 defines the minimum clearances for knees and toes beneath fixed objects. Few comments addressing this section were received....
-
§ 37.185(b)
(b) By October 29, 2012, 100 percent of the buses in its fleet with which it provides fixed-route service are readily accessible to and usable by individuals with disabilities, including...
-
Size: ADA Standard Section 903.3
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
1013.3 Height
The guard height in assembly seating areas shall comply with Section 1028.14. 4. ...
-
1015.3 Height
The guard height in assembly seating areas shall comply with Section 1029.16 as applicable....
-
Water Coolers
The term "water coolers" typically refers to units that are either identical to drinking fountains or to furnishings that are not fixed or plumbed....
-
TRANSIT BOARDING PLATFORM
[DSA-AC] A horizontal, generally level surface, whether raised above, recessed below or level with a transit rail, from which persons embark/disembark a fixed rail vehicle....
-
12142(c)(1) General rule
Except as provided in paragraph (2), it shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a public entity which operates a fixed...
-
§ 37.33(b)
(b) Fixed-route transportation systems operated by public airport operators between the airport and a limited number of destinations in the area it serves are subject to the provisions of...
-
§ 37.185(a)
(a) By October 30, 2006 no less than 50 percent of the buses in its fleet with which it provides fixed-route service are readily accessible to and usable by individuals with disabilities...
-
Horizontal Exits [IBC §1021 (2003), §1005.3.5 (2000)]
horizontal exit compartmentalizes a building allowing occupants to exit the area containing the origin of a fire into another portion of the building that is protected by fire-resistance-rated assemblies...
-
Structural Strength: ADA Standard Section 903.6
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-1009.2.6 Footrests and armrests
Footrests shall be provided and shall move with the seat. The seat shall have two armrests. ...
-
11B-1009.2.6 Footrests and armrests
Footrests shall be provided and shall move with the seat. The seat shall have two armrests....