The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
Search Results "Fixed Assembly Seating"
Filters
Commonly Searched Documents
-
11B-1002.6.2 Transfer height
-
MEASUREMENT TECHNIQUE
is measured between the perineal cutout and the hinge point at the back of the seat....
-
HEWI Hinged Support Rail Duo WARM TOUCH
with cap made of environmentally friendly, chrome-look coated polyamide - wall mounting plate 181 mm high and 130 mm wide - top rail ø 33 mm, bottom rail ø 25 mm - stable three-point fixing...
-
Architectural Barriers
that is difficult to grasp; aisles that are too narrow for a person using a wheelchair, electric scooter, or a walker; a high counter or narrow checkout aisles at a cash register, and fixed...
-
903.3.1.1.1 Exempt locations
Generator and transformer rooms separated from the remainder of the building by walls and floor/ceiling or roof/ceiling assemblies having a fire-resistance rating of not less than 2 hours...
-
12141(4) Operates
(4) Operates The term "operates", as used with respect to a fixed route system or demand responsive system, includes operation of such system by a person under a contractual or other...
-
2.4.1 Current Marketplace Dynamics
As is discussed below, the regulations implementing these federal laws do not currently include specific technical requirements for the accessibility of non-fixed medical equipment, although...
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
11B-411.2.1.3.4 Position
The face of hall call console assemblies and the face of touch screens shall be sloped away from the user at 7 to 25 degrees from the vertical plane....
-
Press Boxes [§206.2.7]
Press Boxes [§206.2.7] An accessible route is required to press boxes except where the aggregate area of all press boxes serving a playing field or assembly area is no more than 500 sq...
-
Vertical Clearance [§307.4]
Fixed barriers, such as guardrails, are required where the vertical clearance is less than 80” such as at open stairways and along sloped or curved walls....
-
306 Knee and Toe Clearance
Section 306 defines the minimum clearances for knees and toes beneath fixed objects. Few comments addressing this section were received....
-
§ 37.185(b)
(b) By October 29, 2012, 100 percent of the buses in its fleet with which it provides fixed-route service are readily accessible to and usable by individuals with disabilities, including...
-
II-5.2000 Methods for providing program accessibility.
ILLUSTRATION 4: A municipal performing arts center provides seating at two prices -- inexpensive balcony seats and more expensive orchestra seats....
-
Size: ADA Standard Section 903.3
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
1013.3 Height
The guard height in assembly seating areas shall comply with Section 1028.14. 4. ...
-
1015.3 Height
The guard height in assembly seating areas shall comply with Section 1029.16 as applicable....
-
Water Coolers
The term "water coolers" typically refers to units that are either identical to drinking fountains or to furnishings that are not fixed or plumbed....
-
TRANSIT BOARDING PLATFORM
[DSA-AC] A horizontal, generally level surface, whether raised above, recessed below or level with a transit rail, from which persons embark/disembark a fixed rail vehicle....
-
12142(c)(1) General rule
Except as provided in paragraph (2), it shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a public entity which operates a fixed...
-
§ 37.33(b)
(b) Fixed-route transportation systems operated by public airport operators between the airport and a limited number of destinations in the area it serves are subject to the provisions of...
-
§ 37.185(a)
(a) By October 30, 2006 no less than 50 percent of the buses in its fleet with which it provides fixed-route service are readily accessible to and usable by individuals with disabilities...
-
Horizontal Exits [IBC §1021 (2003), §1005.3.5 (2000)]
horizontal exit compartmentalizes a building allowing occupants to exit the area containing the origin of a fire into another portion of the building that is protected by fire-resistance-rated assemblies...
