Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
Search Results "Adjustable Height Exam Table"
-
11B-809.10.6.5 Thresholds
- Big John Commode Chair BJBC
-
407.3.6 Width
The width of elevator doors shall comply with Table 407.4.1. EXCEPTION: In existing elevators, a power-operated car door complying with 404.2.3 shall be permitted....
-
7.4.4 Resting Intervals
Where the trail grade exceeds 1:20 (5 percent), resting intervals shall be provided as specified in Table 7.4.3.1....
-
Design parameter considerations
, authored by museum staff or variety of vendor(s) to enable access at first public opening of exhibits regardless of deadlines IR emitter (or other wireless signals) with ability to adjust...
-
1010.1.9.7 Delayed egress locks
The time delay established for each egress-control device shall not be field adjustable....
-
11B-308.4 Suggested reach ranges for children
Where building elements such as coat hooks, lockers, or operable parts are designed for use primarily by children, the suggested dimensions of Table 11B-308.4 shall be permitted....
-
3.2.2.4. Summary of Baselines
The Low Accessibility, Medium Accessibility, and High Accessibility baselines are summarized in Table 3-11. ...
-
11B-308.4 Suggested reach ranges for children
Where building elements such as coat hooks, lockers, or operable parts are designed for use primarily by children, the suggested dimensions of Table 11B-308.4 shall be permitted....
-
Standing Supports (M304.3 and M305.3)
Standing supports that adjust from horizontal to vertical positions and at angles in between, such as a bar that folds up and locks into multiple positions, can be used....
-
Ground Level Requirements Based on Elevated Play Components
Table 240.2.1.2 Number of elevated play components provided Minimum number of ground-level play components required to be on accessible route Minimum number of different...
-
Minimum Green Times
Rather than produce an equation that compensates for the change in acceleration as speed increases, a table format has been used to represent the distance traveled as a function of time....
-
3.1.2. Percentage of Auditoriums by Venue Type
Table 3-2 presents the percentage of auditoriums operated in each venue type, according to the 2009 MPAA report and the 2014 MPAA report. ...
-
3.3 What Is a Reasonable Accommodation?
Reasonable accommodation is a modification or adjustment to a job, the work environment, or the way things usually are done that enables a qualified individual with a disability to enjoy...
-
904 Sales and Service Counters
Specifications are provided for the counter surface height of check-out aisles, including the height of counter edge protection, which is limited to 2 inches above the counter surface (904.3.2...
-
1132A.4, Item 3
., concrete, brick, flagstone) may have a maximum change in height from the interior landing of 4 inches (101.6 mm)....
-
11B-1009.5.4 Transfer steps
Transfer step height shall be 8 inches (203 mm) maximum. The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
11B-1009.5.4 Transfer steps
Transfer step height shall be 8 inches (203 mm) maximum....
-
408.1 General (Section-by-Section Analysis)
In addition to the proposed requirements above, the Board is considering establishing a requirement for the angle of the display screen to be adjustable, so that a person using a wheelchair...
-
11B-224.2 Guest rooms with mobility features
In transient lodging facilities, guest rooms with mobility features complying with 806.2 shall be provided in accordance with Table 224.2....
-
General: ADA Standard Section 803.1
Section 903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
11B-303.5 Warning curbs
(102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs at least 6 inches (152 mm) in height...
-
11B-303.5 Warning curbs
(102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs at least 6 inches (152 mm) in height...