This prohibition is based on section 302(b)(2)(A)(i) of the ADA....
Search Results "Web-Based Service"
-
Section 36.301 Eligibility Criteria (Preamble, Section-by-Section Analysis)
-
Section 36.301 Eligibility Criteria (Section-By-Section Analysis and Response to Comments)
This prohibition is based on section 302(b)(2)(A)(i) of the ADA....
-
Section 37.49 Designation of Responsible Person(s) for Intercity and Commuter Rail Stations
If there is only one railroad operating service through the station, it bears the total responsibility....
-
Rulemaking authority of the Board and effect of the guidelines
Section 255 is based on section 262 of the Senate bill (S.652) which provided first for the Board to develop accessibility guidelines for telecommunications equipment and customer premises...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Passing Spaces: ADA Standard Section 403.5.3
Section 403.5.3 covers the current ADA Standards for passing spaces that are part of an accessible route.
-
11B-407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1....
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
-
11B-704.2.1 Clear floor or ground space
The clear floor or ground space shall not be obstructed by bases, enclosures, or seats. Advisory 11B-704.2.1 Clear floor or ground space....
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
11B-704.2.1 Clear floor or ground space
The clear floor or ground space shall not be obstructed by bases, enclosures, or seats. Advisory 11B-704.2.1 Clear floor or ground space....
-
11B-407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1....
-
Library Card
Department of Agriculture, Forest Service, Missoula Technology and Development Center. 12 p....
-
Future Research Needs
One recurring question during these projects has been whether the creation of access services can be shared across cultural institutions as a way of addressing the limited resources of each...
-
Georgia-Pacific Compact® Splash Blue Vertical Double Roll Coreless Tissue Dispenser 56789
This dispenser delivers 3000 sheets of quality 2-ply tissue for continuous service and increased patron satisfaction....
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
New Jersey Division of Vocational Rehabilitation Services (DVRS)
What services does DVRS provide?...
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Dumpster Enclosures
Dumpster Enclosures Dumpster enclosures used exclusively by employees shall be considered employee work areas based on TAS 201.1; therefore, they must comply with TAS 203.9....
-
Technical Memorandum TM 2013-15 Baby Changing Tables
TM 2013-15 Baby Changing Tables Effective Date: June 1, 2013 2012 TAS Reference: 902 Baby changing tables are work surfaces based on Advisory 902.1; therefore, if fixed...
-
Neo-Metro Metaal Toilet Configured for In-Wall Flushing System
Though the flushing mechanism/carrier is not available from Neo-Metro, further information and latest information is available at the Geberit web site....
