Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
Search Results "Water Closet Clear Floor Space"
-
11B-1002.5.4 Wheelchair storage space
-
705.1.2 Dome Spacing
705.1.2 Dome Spacing....
-
5.8.2.4 Unobstructed Floor Space Recommendation
5.8.2.4 Unobstructed Floor Space Recommendation The Committee recommends the unobstructed floor space in front of the base support be a minimum of 17 inches deep....
- Diversified Woodcrafts ADA Instructor's Desk 1216K-L-ADA
-
Combination Wheelchair/Horse Accessible Gates
This corresponds to the minimum required spacing of the stiles for horses to step over them in stride....
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
- Figure 304.3.2 T-Shaped Turning Space – Drawing from the U.S. Access Board
-
E202.4 ICT Functions Located in Maintenance or Monitoring Spaces
Where status indicators and operable parts for ICT functions are located in spaces that are frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment...
-
11B-233.3.1.2.3 Ground floors above grade
Where the first floor in a building containing residential dwelling units is a floor above grade, all units on that floor shall be adaptable....
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Turning Space [1015.4]
A turning space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide by 24 inches long (figure 29) must be provided...
-
1014.3.1 Surface
The floor surface shall be firm and stable....
-
1014.3.1 Surface
The floor surface shall be firm and stable....
-
11B-809.9.2 Clear width
U-shaped kitchens, with a cooktop, sink or work surface located at the base of the U, that provides knee and toe space complying Sections 11B-809.9.3 and 11B-809.9.4 to allow for a forward...
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
- Inpro Corporation JointMaster® 316 Series Single Sightline for Carpet Floor Expansion Joint Covers
-
Wheelchair Spaces, Companion Seats, and Designated Aisle Seats: ADA Standard Section 802
Wheelchair spaces shall comply with 802.1....
-
4.15.4 Controls
Controls shall comply with 4.27.4. Unit controls shall be front mounted or side mounted near the front edge.
-
Controls [4.15.4]
Controls [4.15.4] Controls must be operable with one hand and not require tight grasping, pinching, or twisting of the wrist to operate. Push bars are easier to use by a broader...
-
4.15.4 CONTROLS
Controls shall comply with 4.27.4. Unit controls shall be front mounted or side mounted near the front edge.
-
Fishing Facilities
Word Fillable Form (0.8MB) Word Non-Fillable Form (0.8MB) PDF Non-Fillable Form (0.7MB)
-
Wayfinding is more than just graphics (slides 2 – 4)
to help us navigate space....