Additionally, because the wheelchair spaces must also meet the dispersion requirements of F221.2.3, the boxes containing these wheelchair spaces cannot all be located in one area unless...
Search Results "Public Use Area"
Filters
Commonly Searched Documents
-
F221.2.1.3 Other Boxes
-
221.2.1.3 Other Boxes
Additionally, because the wheelchair spaces must also meet the dispersion requirements of 221.2.3, the boxes containing these wheelchair spaces cannot all be located in one area unless an...
-
221.2.1.3 Other Boxes
Additionally, because the wheelchair spaces must also meet the dispersion requirements of 221.2.3, the boxes containing these wheelchair spaces cannot all be located in one area unless an...
-
III-4.4600 Seating in assembly areas
III−4.4600 Seating in assembly areas....
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
spectators and are not wanted by individuals who use wheelchairs and their companions....
-
ADAAG
Like most federal regulations, ADAAG was developed under a rule making process that invites public comment through publication in the Federal Register....
-
11B-221.2.1.3 Other boxes
Additionally, because the wheelchair spaces must also meet the dispersion requirements of 221.2.3, the boxes containing these wheelchair spaces cannot all be located in one area unless an...
-
11B-221.2.1.3 Other boxes
Additionally, because the wheelchair spaces must also meet the dispersion requirements of 221.2.3, the boxes containing these wheelchair spaces cannot all be located in one area unless an...
-
11B-221.2.1.3 Other boxes
Additionally, because the wheelchair spaces must also meet the dispersion requirements of Section 11B-221.2.3, the boxes containing these wheelchair spaces cannot all be located in one area...
-
T404.3 Ramps and Bridgeplates
Where the space between the floor of non-rail vehicles and a boarding platform is greater than 2 inches (51 mm) horizontally or 5/8 inch (16 mm) vertically when measured at 50...
-
K5
K5. If the operating controls are set back 10 to 24 inches from the front edge of the counter or table are they no higher than 46 inches above the floor? [ADA Standards §...
-
§382.57(b)(4)(ii)
(ii) Maintained in proper working condition.
-
§382.57(b)(4)(i)
(i) Visually and tactilely identifiable to users as accessible (e.g., an international symbol of accessibility affixed to the front of the device; and
-
408.4.4 Leveling
Elevator car leveling shall comply with 407.4.4.
-
408.4.8 Emergency Communications
Car emergency signaling devices complying with 407.4.9 shall be provided.
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303.
-
408.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303.
-
11B-408.4.3 Platform to hoistway clearance
The platform to hoistway clearance shall comply with Section 11B-407.4.3.
-
604.9.5 Flush Controls
604.9.5 Flush Controls. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm)...
-
604.9.5 Flush Controls
Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish...
-
408.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303.
-
408.4.3 Platform to Hoistway Clearance
The platform to hoistway clearance shall comply with 407.4.3.
-
604.9.5 Flush Controls
Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish...
-
408.4.4 Leveling
Elevator car leveling shall comply with 407.4.4.