Ramps with a vertical rise of more than 6 inches must have handrails on both sides....
Search Results "Handrail Height"
Filters
Commonly Searched Documents
-
Part 1. Typical Issues for Voters Who Use Wheelchairs, Scooters or Other Mobility Aids
-
Temporary Solutions for Election Day: Accessible Entrance to Polling Place
If another accessible entrance is not available, install a temporary ramp with edge protection and handrails. Problem Two: There is a small step at the entrance....
-
Dimensions for Adults and Children [§102]
The ADA Standards also include requirements for play areas (§240 and §1008) and recommendations (advisory notes) with respect to children’s reach ranges (§301.1) and ramp handrails used...
-
11B-106.5 Defined terms
Element Enforcing Agency Exit Facility Health Care Provider Handrail...
-
382.57 What services must carriers provide if their automated kiosks are inaccessible?
., to wheelchair users because of height or reach issues, to visually-impaired passengers because of issues related to visual displays or touch screens), carriers must ensure equal treatment...
-
Vertical Access to Mezzanines
Since mezzanines are elevated at heights similar to a full story, access by ramp or certain platform lifts may not provide a practical alternative....
-
2. Are play components that have multiple stations or which can include more than one person using them at one time considered one or two play components?
If required to be accessible, a play component must be on an accessible route, have clear floor or ground space and maneuvering space, and have entry points and seats at the required heights...
-
407.2.1.3 Clear Floor or Ground Space
The height of the clear floor or ground space is considered to be a volume from the floor to 80 inches (2030 mm) above the floor....
-
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
The limitation on edge protection height will reduce the possibility that the edge protection will interfere with the patient’s footrest. 5.8.1.2.2 Single Ramp Scale with Edge Protection...
-
407.2.1.3 Clear Floor or Ground Space
The height of the clear floor or ground space is considered to be a volume from the floor to 80 inches (2030 mm) above the floor....
-
Signs
Signs that provide direction to, or information about, functional spaces (§ 4.1.3(16)(b)) must comply with requirements for: Character proportion (§ 4.30.2); Character height...
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
§ 37.42(f)
means a boarding platform design in which the horizontal gap between a car at rest and the platform is no more than 10 inches on tangent track and 13 inches on curves and the vertical height...
-
Shelves, Sales and Service Counters, and Check-Out Aisles
However, shelves may be of any height since they are not subject to the ADA's reach range requirements....
-
Plumbing/Restrooms
11B-609 Ambulatory compartments 11B-604.8.2 Urinals 11B-605 Accessible lavatories, heights...
-
Signage
Signs are subject to requirements in 4.30 for character proportion (4.30.2) and height (4.30.3) and sign finish and contrast (4.30.5)....
-
9.2.2(7) Kitchens, Kitchenettes, or Wet Bars
Counter tops and sinks shall be mounted at a maximum height of 34 in (865 mm) above the floor....
-
Plumbing/Restrooms
11B-609 Ambulatory compartments 11B-604.8.2 Urinals 11B-605 Accessible lavatories, heights...
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
§ 37.42(f)
means a boarding platform design in which the horizontal gap between a car at rest and the platform is no more than 10 inches on tangent track and 13 inches on curves and the vertical height...
-
(1)(a)
Fold-down or retractable seats or shelves may overlap the clear floor space at a lower height provided they can be easily folded up or moved out of the way....
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
Background
Current accessibility standards include criteria related to seat height, clear floor space, and grab bar placement in places where transfers are expected [7]....