Doors shall have a clear opening at least 32 inches wide when measured from the face of the door to the opposite stop when the door is opened 90 degrees and shall have hardware usable with...
Search Results "Entry Door (FHA)"
Filters
Commonly Searched Documents
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
-
Sargent 8700 Surface Vertical Rod Exit Device
The SARGENT 8700 Surface Vertical Rod Exit Device has two point latching (top and bottom of the door) and is adjustable through the center case....
-
Cal-Royal Challenger Cylindrical Lockset
DOOR RANGES - 1 3/8" to 1 3/4" thick doors. BACKSET -2 3/4" Standard, 2 3/8", 3 3/4" and 5" optional....
-
Corbin Russwin Inc. ML2000 Series Mortise Lockset
When matched with Corbin Russwin patented high-security Pyramid cylinders, any door can become a formidable barrier to intruders....
-
11B-233.3.1.2.6 Public housing facility site impracticality
The site impracticality tests in this section may be used to determine the number of required residential dwelling units with adaptable features in buildings without an elevator,...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
Allegion Falcon MA Series Mechanical Locks
All locks shall be UL listed for 3 hour fire door. Lock case is non-handed, reversible without opening the lock case and manufactured of zinc dichromate plated steel....
-
M303.2.3.1 Front or Rear Entry
Where wheelchair space entry and exit is provided at only one end (front or rear) the wheelchair space shall be 48 inches (1220 mm) deep minimum....
-
Rockwood Manufacturing Company K2060 - .060" Thick Plastic Kick Plate - Heavy Duty
• SA-F - self-adhesive mounting (K2060SA-F) and UL approved for use of 90-minute wood doors and 3-hour metal doors. Width of Plates: Push Side - 2" less than door width....
-
M303.2.3.2 Pass Through Entry
Where wheelchair space entry and exit permits pass through from one end to the other, the wheelchair space shall be 40 inches deep (1015 mm) minimum....
-
Cal-Royal HIL Series Interconnected Lockset
LATCHBOLT - "UL" Listed for 3 hour doors. 2 3/4" standard backset, 1/2" throw front 2 1/4" x 1 1/8". 2 3/8" backset optional....
-
Don-Jo Mfg., Inc. Commercial Kick Plates 90
Product Specifications Number 90 Material .050 Metal Features Furnished with grain running horizontally to door Finishes...
-
Figure 307.4 Vertical Clearance – Drawing from the U.S. Access Board
-
Allegion Glynn-Johnson Push/Pull Latches
Glynn-Johnson has been providing the highest quality door control hardware for 75 years. Glynn-Johnson uses only state-of-the-art technology and manufacturing processes....
-
TownSteel CDC-110 Classroom Instruder Mechanical Cylindrical
Turning inside lever any time opens the door....
-
Stanley QME 100 Series Grade 1 Heavy Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
Stanley QMS 100 Series Grade 1 Heavy-Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
TownSteel MS Series, Grade 1 With "W" Escutcheon Mortise Locks
It's specially designed to cover extra holes of exiting door prep....
-
TownSteel CSRC Series, Grade 2, Clutched, Conical Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
TownSteel CB Series, Grade 2 Non-Clutched Flat Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
Activar Hiawatha 5-1/2P Series Pull with Matching Push Plate
Cast Pull Combined with Coordinating Push Plate Gives Your Door A Finished Look and a Durable Finish. The most popular Hiawatha pull plate combinations are shown here....
-
Figure 404.2.4.1(a) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Pull Side – Drawing from the U.S. Access Board
