Other manufacturers may radiate less light energy from their emitters and depend upon the sensitivity and electronics of the receivers to detect an adequate signal....
Search Results "Elevator Hall Signal"
-
2.3.3 Issues
-
§40.2(b)(2)
(2) All elevator residential structures;...
-
III-3.7000 Maintenance of accessible features
ILLUSTRATION 2: Placing ornamental plants in an elevator lobby may be a violation if they block the approach to the elevator call buttons or obstruct access to the elevator cars....
-
CCDA Accessibility Checklist for Building Inspectors, 2015 Edition
The trained building code official/building inspector must assess the elevations and slopes of the existing streets and sidewalks, location of existing buildings, existing drainage and other...
-
Position: ADA Standard Section 703.3.2
EXCEPTION: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located either directly below or adjacent to the corresponding raised characters...
-
11B-407.4.9 Emergency communication
Emergency two-way communication systems between the elevator and a point outside the hoistway shall comply with ASME A17.1. [2010 ADA Standards] 407.4.9 Emergency Communication....
-
11B-407.4.9 Emergency communication
Emergency two-way communication systems between the elevator and a point outside the hoistway shall comply with ASME A17.1. [2010 ADA Standards] 407.4.9 Emergency Communication....
-
Employee Work Areas: ADA Standard Section 206.2.8
Section 206.2.8 covers scoping requirements in the most current ADA Standards for accessible routes in employee work areas.
-
11B-703.3.2 Position
Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
-
11B-703.3.2 Position
Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
-
11B-106.5 Defined terms
VEHICLE (EV) ELECTRIC VEHICLE (EV) CHARGER ELECTRIC VEHICLE CHARGING SPACE (EV SPACE) ELECTRIC VEHICLE CHARGING STATION (EVCS) ELECTRIC VEHICLE (EV) CONNECTOR ELEMENT ELEVATED...
-
407.2.3 Hoistway Signs
Signs at elevator hoistways shall comply with 407.2.3....
-
407.2.3 Hoistway Signs
Signs at elevator hoistways shall comply with 407.2.3....
-
STAIR
A change in elevation, consisting of one or more risers....
-
STAIR
A change in elevation, consisting of one or more risers....
-
PLACE OF PUBLIC ACCOMMODATION
(2) A restaurant, bar, or other establishment serving food or drink; (3) A motion picture house, theater, concert hall, stadium, or other place of exhibition or entertainment;...
-
1010.2.13.1 Delayed egress locking system
Initiation of the irreversible process shall activate an audible signal in the vicinity of the door....
-
1010.2.12.1 Delayed egress locking system
Initiation of the irreversible process shall activate an audible signal in the vicinity of the door....
-
Detectable Warnings on Walking Surfaces [4.29.2]
Research indicates that the most effective detectable warning: has a unique texture distinct from other common surfaces in the environment adjoins or abuts the hazard to signal...
-
STAIR
A change in elevation, consisting of one or more risers....
-
Hardwired Systems
INDUCTION LOOP INFRARED FM Sources of Signal Interference wiring, computers, transformers, florescent lighting (less with 3-D mat); construction steel can cause erratic...
-
Location and Spacing
It may be possible to serve some large rooms or corridor sections with a single appliance located on a perimeter wall or suspended below the ceiling so that the signal can spread throughout...
-
Table 3
transportation departments: Detectable warning surfaces on curb ramps and blended transitions at pedestrian street crossings (see R208.1 and R305); Accessible pedestrian signals...
-
Sennheiser SZI 1015 2-Watt Radiator
The RF signal from the modulator can be daisy-chained via BNC sockets. A barrier strip with RF and DC inputs and outputs is connected in parallel....
