, additional systems or devices are not required for each vehicle provided that the single device could be used to provide access to each new vehicle if passengers using wheelchairs or mobility...
Search Results "Anthropometry of Wheeled Mobility Project"
Filters
Commonly Searched Documents
-
§ 38.83(a)(2) Exception
-
Receivers
Conducted by the Lexington Center, this project included collecting information on assistive listening systems, a review of the state-of-the-art with respect to assistive listening systems...
-
28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations - Movie Theaters; Movie Captioning and Audio Description Final Rule
If a public accommodation converts a movie theater auditorium from an analog projection system to a system that it allows it show digital movies after December 2, 2016, the public accommodation...
-
Annualized Costs of New Accessibility Requirements for OTRBs
With respect to per-requirement costs, the Final RA evaluates the respective costs of each of the four new OTRB accessibility requirements under the three cost scenarios over the projected...
-
DOT Memorandum: INFORMATION: Snow Removal on Sidewalks Constructed with Federal Funding
Section 116 requires a State DOT to maintain projects constructed with Federal-aid funding or enter into a maintenance agreement with the appropriate local official where such projects are...
-
AIAU Accessible Architecture: Designing for Success (Parts 1-3)
Instructor Bradley Gaskins Description To get your projects right the first time, design and accessibility should go hand-in-hand....
-
Besam SL500 Surface Mount Automatic Sliding Door
Technical Description: Attractive, shallow header suitable for retrofit applications Strong and powerful - opening 20% faster Dual carriage wheels standard for increased stability...
-
HEWI Push/Pull Handle set to EN 179
This makes actuating the lever handle inconvenient for tall people and rollator or wheeled walker users....
-
11B-233.3 Public housing facilities
Section 11B-233.2 requires that entities subject to HUD's regulations implementing Section 504 of the Rehabilitation Act of 1973, as amended, provide residential dwelling units containing mobility...
-
3. Medical Diagnostic Equipment
They include requirements for equipment that necessitates transfer from mobility aids and address transfer surfaces, support rails, armrests, and other features....
-
11B-802.1.3 Depth
Consideration should be given to the alignment of the wheelchair space and the adjacent companion seat which may require the rear tires of the wheelchair to project behind the back of the...
-
Q2: Milling a Road Surface
A2: A project that involves milling an existing road, and then overlaying the road with material, regardless of whether it exceeds the height of the road before milling, falls within the...
-
DSA IR 11B-9: Accessibility Requirements for Solar Photovoltaic Systems at School Sites
by the Division of the State Architect (DSA) staff, and as a resource for design professionals, to promote more uniform statewide criteria for plan review and construction inspection of projects...
-
Treads and Risers [4.9.2], Nosings [4.9.3]
., projecting more than 1 1/2 inches) can catch the toe. Angled or rounded nosings or sloped risers help prevent this hazard and provide a smoother transition....
-
4.8.5* HANDRAILS
If a ramp run has a rise greater than 6 in (250 mm) or a horizontal projection greater than 72 in (1830 mm), then it shall have handrails on both sides....
-
Alterations [§206.4 and §202.4]
When alterations are made to primary function areas, a connecting accessible path of travel from site arrival points is required to the extent that it does not exceed more than 20% of the project...
-
Suggested best practices for architects and other design professionals
Of course, if industry standards do not exist, the architect or designer must create their own for each project....
-
68.93. Complaints, Investigations, and Audits
Records pertaining to a project for which plan review, inspection, or related activities have been or will be performed, shall be made available by the registered accessibility specialist...
-
11B-802.1.3 Depth
Consideration should be given to the alignment of the wheelchair space and the adjacent companion seat which may require the rear tires of the wheelchair to project behind the back of the...
-
11B-802.1.3 Depth
Consideration should be given to the alignment of the wheelchair space and the adjacent companion seat which may require the rear tires of the wheelchair to project behind the back of the...
-
Mockett CH12-SSS Dual Prong Coat Hook
Size: 6 7/8" high, 3/8" diameter hook, 3 1/2" overall projection. Mounting hardware included. Finish: Satin Stainless Steel....
-
Mega Jailhouse One Piece Security Mirror - MOD to 18" by 30"
The mirror maintains a very low projection from the wall. Fasteners and wall anchors are not included....
-
Mockett CH17-94 Ball & Tongue Coat Hook
Size: 3 19/32" high x 1 5/16" wide, 1 3/8" projection. Mounting hardware included....
-
Panda S.15 All Wood with Aluminum Core Lift & Slide System
Hardware Operating Mechanism Wheel Carriage Lift & Slide wheel carriage assembly including drive bars, wheel hubs, ball bearings, lock cases, carriage link rods...
