EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. Figure 403.5.2 Clear Width at Turn...
Search Results "OOC: Office of Compliance"
-
403.5.2 Clear Width at Turn
-
1.9.1.8 Adopting agency identification
ETA Editor's Note Sections from California Building Code Chapter 1 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted. ...
-
11B-403.5.2 Clear width at turn
Exception: Where the clear width at the turn is 60 inches (1524 mm) minimum compliance with Section 11B-403.5.2 shall not be required. FIGURE 11B-403.5.2 CLEAR WIDTH AT TURN...
-
2. Effective Date
On March 15, 2012, compliance with the 2010 Standards will be required for new construction and alterations and barrier removal....
-
5. CONSTRUCTION TOLERANCES
CONSTRUCTION TOLERANCES: While it is always advisable to avoid design requirements that are at or near dimensional thresholds, construction tolerances may be used when evaluating the compliance...
-
Fixtures
For purposes of compliance with TAS 604.3.2, the reference to “fixture” shall mean the plumbing fixtures identified in TAS 213.3 and baby changing tables which are identified as convenience...
-
Gaps
However, if compliance with those measurements is not operationally or structurally feasible, operators may use bridge plates, ramps or other devices....
-
C.7.ii. - Can a federal agency provide alternate web pages for users with disabilities to supplement web pages that have innovative features which are inaccessible to assistive technologies?
be creative and innovative in the use of new technologies, Section 1194.22(k) requires that a text-only web page be provided only as a method of last resort for bringing a web site into compliance...
-
2010 ADA Standards for Accessible Design
Full compliance with the 2010 Standards is required only for new construction and alterations. The web address for the 2010 Standards is in the Resources section....
-
Executive Order 13132 (Federalism)
the relationship between the national government and the States, or the distribution of power and responsibilities among the various level of government; (2) imposes substantial direct compliance...
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
§ 36.304(d)(3)
(3) If, as a result of compliance with the alterations requirements specified in paragraph (d)(1) and (d)(2) of this section, the measures required to remove a barrier would not be readily...
-
4.1 Path of Travel Upgrades Not Required
4.1 Path of Travel Upgrades Not Required: 11B-202.4 Exception 2 does not require path of travel upgrades for certain elements that have been previously constructed or altered in compliance...
-
68.20(e) Railroad Vehicles
(e) Commercial facilities are subject to the Act and compliance with TAS if they are intended for non-residential use by a private entity and if their operations will affect commerce....
-
4. Access to Newly Constructed and Altered Facilities
Access to Newly Constructed and Altered Facilities In implementing the program, the City will ensure that all future construction and alteration work on Pedestrian Facilities will be in compliance...
-
1.9.1.8 Adopting agency identification
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
§ 37.135(c)(1)
entity has met and is continuing to meet all requirements for complementary paratransit in §§37.121-37.133 of this part, the entity may submit to FTA an annual certification of continued compliance...
-
1.9.1.8 Adopting agency identification
ETA Editor's Note The remainder of California Building Code Chapter 1 is not adopted by Division of the State Architect - Access Compliance (DSA-AC), has been omitted....
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
The Accessibility Management Platform (AMP) - AMP for Mobile
Management Platform (AMP) and available as an add-on subscription service for AMP Enterprise licensees, AMP for Mobile now adds the ability to perform automated testing of mobile systems for compliance...
-
5. Q: Recently a job applicant for a police officer's job came into the police department with fingers that were visibly impaired. The police department required that he demonstrate that he could pull the trigger on the police issue firearm and reload it before a conditional job offer was made. Did this violate the ADA?
A: No. If an individual has a "known" disability that would reasonably appear to interfere with or prevent performance of job functions, that person may be asked to demonstrate how...
-
Number and Location: ADA Standard Section 221.2.1
Section 221.2.1 covers scoping requirements in the current ADA Standards for the number and location of wheelchair spaces.
-
General: ADA Standard Section 603.1
Section 603.1 of the ADA Standards covers information in the current ADA Standards for toilet and bathing rooms.
-
General: ADA Standard Section 301
Section 301 of the ADA Standards covers information on the foundations that the ADA Standards are built on.
