: Hex dogging standard Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7' door...
Search Results "Low Energy Door"
Filters
Commonly Searched Documents
-
Allegion Falcon 1990 Series Cross Bar Exit Devices
-
Figure 404.2.4.1(g) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
Allegion Von Duprin 33A/35A Series Exit Devices
33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1....
-
7(2)(a)
(a) Bathrooms that have reinforced walls for grab bars (see Requirement 6) would meet section 100.205(c)(3)(iv) if: Note: Cabinets under lavatories are acceptable provided the...
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—
-
Allegion Von Duprin 55 Series Cross Bar Exit Devices
5575 mortise lock devices for all types of single and double doors. UL listed for accident hazard installations....
-
TownSteel TS8000 Grade 2 Fire Rim Device
SPECIFICATION Application For single or double door Door Thickness 1-3/8" - 2", specify when other than 1-3/4" Device Length 36" for 30" to 36" wide openings 48" for 36" to 48"...
-
The Perils Of Slope
Requires the Registered User plan or above. Login! -
New Hampshire Association for the Blind
Among these are vision rehabilitation therapy, orientation and mobility training, low vision services, education services for school aged children and counseling....
-
Allegion Falcon 2390 Series Recessed Exit Device
The best available recessed concealed device for stile and rail doors....
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
Corbin Russwin Inc. ED8000 Pushpad Exit Device
Meets ANSI Grade 1 requirements Easy-to-use pushpad for quick egress and ADA compliance Heavy-duty steel construction 3/4" latchbolt standard on rim device Low...
-
PRL Glass Systems Inc. Panic Device PL-100 Series
These panic are a contemporary design offered primarily for all Glass Door/Entrance Systems with a minimal latch mechanism....
-
Yale 1500 Series Traditional Exit Devices
Lever, knob, handle and pull trim designs offer variety and permit hardware balance throughout a building 2-point hex-key dogging for standard devices allows quiet push-pull door...
-
TownSteel ED5500F Grade 1 Fire Rim Device
SPECIFICATIONS Application For single or double door with or without mullion Door Thickness 1-3/4" standard Backset 2-3/4" Device Length 36" for 2'6' to 3' wide openings 48" for...
-
Road Closure Drawings
Many forest roads are closed to motor vehicle traffic by gates or other types of barriers. Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged...
-
T204.2 Doorways with Lifts, Ramps or Bridgeplates
Doorways with lifts or ramps shall comply with T502.2.
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained....
-
Allegion Falcon 1490 Series Exit Devices
Sizes: 36", 42", 48" Doors: 1 3/4" thick metal doors-specify if other than 1 3/4" Projections: 2 3/4" maximum, 2" when dogged....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
TownSteel ED5500 Grade 1 Panic Rim Device
SPECIFICATIONS Application For single or double door with or without mullion Door Thickness 1-3/4" standard Backset 2-3/4" Device Length 36" for 2'6' to 3' wide openings 48" for...
-
Elevator Doors
Section 407.3.1 recognizes acceptable types of elevator doors. The proposed rule recognized horizontal sliding doors....
